Fireray 5000 Auto-Aligning Reflective Beam Smoke Detector With 50 or 100m Head

Product Options

  • Price:
  • (Exc. VAT: )
    • In Stock
  • EN=5000-101

Fireray 5000 Auto-Aligning Reflective Beam Smoke Detector With 50 or 100m Head

The Fireray 5000 motorised reflective, auto aligning infrared optical beam smoke detector can be installed with up to two detector heads per system, thus saving on installation time and costs. In addition, each system controller houses two pairs of fire and fault relays, one per detector. This innovative system has been designed from the ground up to include pioneering technology that fully addresses the needs of the installer and user, both now and in the future.

Key Features

  • Allows for 2 Detectors per System Controller
  • Each Detector configurable from 8m to 100m
  • Separate Fire and Fault relays per Detector
  • Integral LASER alignment
  • Auto-Align Fast Automatic Beam Alignment
  • Building Movement and Contamination Compensation
  • Low Level System Controller
  • Logs the 50 most recent events per detector
  • Approved to EN54:12 and UL268

Applications

With its industry leading optics, the FIRERAY® 5000 is ideally suited for the protection of large areas where the use of traditional detection technologies would prove to be too difficult and/or costly to install.

The FIRERAY® 5000 combines an infrared transmitter and receiver in the same discrete unit and operates by projecting a well-defined beam to a reflective prism, which returns the beam to the receiver for analysis.

Operation

Getting the system operational is simplified by a number of groundbreaking features that combine to make the FIRERAY® 5000 the quickest and easiest detector of its type to install. Each detector takes under 5 minutes to fully align.

A full range of installation accessories are available including the new Adjustment Bracket, which allows a greater degree of flexibility during installation.

Once the detector heads are connected, using the Easifit First Fix system, an integral LASER can be activated. This allows the reflective prism to be positioned quickly and with confidence. Once the LASER has been used to coarsely align the beam, Auto- Align takes over and automatically steers the beam into the optimum position. During alignment the system automatically switches to high current mode and drops back to low current mode when in normal operation, however, alignment is still possible in low current mode.

Technical Specication

  • Operating Voltage (to System Controller) : 14 - 36 VDC
  • Operating Current (constant) - with 1 detector : 5 - 6 mA (Typical 5.5 mA)
  • Operating Current (constant) - with 2 detectors : 7.5 - 8.5 mA (Typical 8 mA)
  • Operating Current (constant) - alignment modes, with 1 or 2 detectors : 35 - 37 mA (Typical 36 mA)
  • Response Threshold/ Sensitivity (Default 35%) :
    • 0.45 - 3.98 dB
    • 10 - 60 %
  • Delay to Alarm – user settable (Default 10 sec) : 2 - 30 sec
  • Delay to Fault – user settable (Default 10 sec) : 2 - 30 sec
  • Operating distance (separation) * : 8 - 100 m
  • Maximum angular alignment of detector : ±3.5 Deg
  • Optical wavelength : 850 nm
  • Fault level/ Rapid obscuration ( 2 sec) : 87 %
  • Operating temperature : -10 - +55 Deg C
  • Storage temperature : -40 - +85 Deg C
  • Relative humidity (non condensing) : 93 %
  • IP rating : 54
  • Contact Voltage - Fire & Fault relays (VFCO) : 0.1 - 36 VDC
  • Contact Current - Fire & Fault relays (VFCO) : 0.1 - 100 mA
  • Cable length - System Controller to Detector (2 core) : 100 m
  • Cable gauge :
    • 24 - 14 AWG
    • 0.5 - 1.6 mm
  • Housing flammability rating : UL94V0
  • CPD Reference : 0832-CPD-0565
  • UL File : S3417

Dimensions and Weight

  • System Controller, including base (WxHxD) : 202 x 230 x 87mm @ 1.0kg
  • Detector, including ‘easy fit’ base (WxHxD) : 134 x 131 x 134mm @ 0.5kg
  • Reflector (WxHxD) : 100 x100 x 10mm @ 0.1kg

Datasheets

Product Reviews

Review this product