Addressable Detectors

• Option Of A1R (54°C) or CS (92°C) Classification Heat Detector.
• Evolution FSK protocol.
• EEPROM Addressed (Programmer).
• RIL and Base Control Outputs.

• Optical Detector.
• Version With 
• Evolution FSK protocol.
• EEPROM Addressed (Programmer).
• RIL and Base Control Outputs.

• Analogue sensing - reduces false and unwanted alarms.
• Addressable - system knows the status and location of every sensor.
• Automatic self test.
• EN54 Part 5 approved and CPD certified.

• Multi-mode detector offering 6 detection modes.
• Available with integral sounder and strobe.
• Compatiable with all Fike addressable panels including the CIE-A-200.

• 8 LEDs for improved, 360° visibility.
• Available in white or black.
• Optional integrated isolator.
• Addressed with dip switches or hand-held programmer.

• Ideal in environments that are dirty or smoky under normal conditions
• Well-suited to warehouses, loading bays and car parks
• Unaffected by wind or atmospheric pressure

• Alarm flag for fast alarm reporting.
• Alarm address for fast location of alarm.
• XPERT 7 Card addressing.
• Electronics-free base.
• Easy installation.
• Elegant design.
• XP95, Discovery and CoreProtocol compatible.
• Responds well to slowburning, smouldering fires.
• Well-suited to bedrooms and escape routes.
• Unaffected by wind or atmospheric pressure.

• Removable, High Performance chamber
• Twin LEDs allow 360° viewing – green when polling, turn red in fire
• Availble in Ivory or White finish

• Incorporates Fixed Temperature and Rate Of Rise Heat elements
• Electronically addressed
• Available in Ivory or White

• Responds to slow burning fires.
• EN54-7 and CPR certified.
• Analogue sensing - reduces false and unwanted alarms.

• Optical Smoke and 54°C (A1R) Heat Sensors in one housing.
• Evolution FSK protocol.
• EEPROM Addressed (Programmer).
• RIL and Base Control Outputs.

• Designed to meet EN54 requirement
• Lockable to base to stop unauthorised removal
• Remote LED output
• 8 LEDs for improved, 360° visibility
• Compatible with all Fyreye MkII bases
• Addressed with dip switches or hand-held programmer

• Tri colour LED offering red, green and amber colour
• Rotary decade address switches 0 - 159
• Pure white colour to complement modern buildings
• 100% mechanical and electrical backwards compatibility
• New base design to complement the detector

• Ideal in environments that are dirty or smoky under natural conditions
• Well suited for warehouses, loading bays and car-parks
• Unaffected by wind or atmospheric pressure

• User selectable modes
• Incorporates Optical & Heat elements
• Availble in Ivory or White finish

• Designed to meet EN54 requirement
• Remote LED output
• 8 LEDs for improved, 360° visibility
• Addressed with dip switches or hand-held programmer

• Addressable heat sensor.
• Soft addressed.
• Integral short circuit isolator.
• Single address.
• Wide range of sensor types.
• 360° visibility LED using lightpipe technology.
• Drift compensation.
• Aesthetically pleasing.
• Quick and simple to install.
• Single “multi-mode” heat sensor.
• Wide viewing angle for increased LED visibility.
• Common mounting base.
• Positive “lock” indication.
• Discreet design for incorporation into any decor.
• Easy to maintain/service.

• Addressable optical sensor.
• Soft addressed.
• Integral short circuit isolator.
• Single address.
• Wide range of sensor types.
• 360° visibility LED using lightpipe technology.
• Drift compensation.
• Aesthetically pleasing.
• Quick and simple to install.
• Single “multi-mode” heat sensor.
• Wide viewing angle for increased LED visibility.
• Common mounting base.
• Positive “lock” indication.
• Discreet design for incorporation into any decor.
• Easy to maintain/service.

• Senses both smoke and heat.
• Heat only facility.
• Smoke element complies with EN54 Part 7 and CEA4021.
• Heat element complies with EN54 Part 5 Class A1 and A2.
• Analogue sensing - reduces false and unwanted alarms.
• Addressable - system knows the status and location of every detector.

• New mechanical platform with revolutionary chamber offering improved false alarm immunity.
• Tri colour LED offering red, green and amber colours.
• Pure white colour to compliment modern buildings.

The FEAH2000 is an analogue addressable Heat detector that works to the Zeta Addressable protocol. The measuring circuit is based on a single precision thermistor, whose characteristics change according to temperature in a defined manner.

The FEAH2000 is an analogue addressable Heat detector that works to the Zeta Addressable protocol. Change in characteristics is converted to an analogue value, and sent digitally back to the fire alarm control panel.

• Addressable optical detector for Zata MK1 legacy addressable systems.
• Twin LEDs to improve alarm indication.

• Sensitive to a wide range of fires
• Well suited for environments such as hotel bedrooms
• Unaffected by wind or atmospheric pressure

• Ideal in environments that are dirty or smoky under normal conditions
• Well-suited to warehouses, loading bays and car parks
• Unaffected by wind or atmospheric pressure
• Five response modes
• Remote test feature

Key Features

• Responds well to slow-burning smouldering fires
• Well suited for bedrooms and escape routes
• Unaffected by wind or atmospheric pressure
• Five response modes
• Remote test feature

• Dual Optical Technology reduces false alarms.
• Evolution FSK protocol.
• EEPROM Addressed (Programmer).
• RIL and Base Control Outputs.

• Low profile System Sensor optical smoke detector.
• Revolutionary chamber offering improved false alarm immunity.

• Designed to meet EN54 requirement
• Remote LED output
• 8 LEDs for improved, 360° visibility
• Addressed with dip switches or hand-held programmer

• Addressable photo thermal ‘Dual’ sensor.
• Soft addressed.
• Integral short circuit isolator.
• Single address.
• Wide range of sensor types.
• 360° visibility LED using lightpipe technology.
• Drift compensation.
• Aesthetically pleasing.
• Quick and simple to install.
• Single “multi-mode” heat sensor.
• Wide viewing angle for increased LED visibility.
• Common mounting base.
• Positive “lock” indication.
• Discreet design for incorporation into any decor.
• Easy to maintain/service.

• Dual Optical Technology Plus Heat Sensor Reduces False Alarms.
• Evolution FSK protocol.
• EEPROM Addressed (Programmer).
• RIL and Base Control Outputs.

• Built in short circuit isolation.
• New advanced Opal protocol allows mapping of the loop for precise fault location using isolators.
• Tri colour LED offering red, green and amber colours.
• Rotary decade address switches.

• Heat, dual angle optical scatter and carbon monoxide (CO).
• Certified sensitivity settings that suit certain environments/applications.
• Short circuit Isolator in each device.
• Sound output synchronised and compatible with S-Quad range of EN54-23 VADs.

Key Features

• Ideal for a wide range of applications
• Enhanced false alarm management
• Recommended, in specific modes, for hotel bedrooms and hospital wards
• Unaffected by wind or atmospheric pressure
• Well-suited to sensitive environments
• Five EN 54 approved response modes
• Heat only and optical only options
• Remote test feature

• Optical smoke detector for Nittan Sensortec systems.
• Latest generation Nittan optical chamber.
• Omniview 360° LED.
• Robust fully modulated AS communications protocol.

• Low profile System Sensor addressable heat detector.
• 58°C fixed temperature and rate of rise (Class A1R), 58°C fixed (Class A1S) and 78°C fixed (Class BS) available.

• Soteria heat detectors with heat clasifications A1R, A2R, A2S, BR, BS, CR or CS.
• Simple installation with a new easy-fit base and an isolator located in the head.
• PureLight® technology.
• A sleek and stylish low-profile or flush design.
• Compatible with XP95 & Discovery protocols.
• Comprehensively tested to exceed EN54 standards.
• Extensively tested at Apollo’s state of the art in-house testing facilities.

• Enhanced reliability of smoke detection.
• Reduction in false alarms.
• Simple installation with a new easy-fit base and an isolator located in the head.
• PureLight® technology.
• A sleek and stylish low-profile or flush design.
• Compatible with XP95 & Discovery protocols.
• Comprehensively tested to exceed EN54 standards.
• Extensively tested at Apollo’s state of the art in-house testing facilities.

• System Sensor two sensor multi-criteria fire detector incorporating photoelectric and thermal sensing elements.
• New mechanical platform with revolutionary chamber.

• Responds to smouldering and flaming fires.
• Less susceptible to false alarms caused by steam and dust.
• Five response modes.
• Remote test feature.

• IP67 Rated
• Incorporates Fixed Temperature and Rate Of Rise Heat elements
• Supplied with fixing base

• Early warnign of carbon based smouldering fires.
• Resistance to false alarms in areas with high levels of steam and other airborne particles.
• Ideal for protecting small volume sleeping risk areas.
• Resitance to contamination in dirty and dusty conditions.
• Excellent supplement to fire detection systems to improve detection of smouldering hydrocarbon fires.

• Low profile
• Heat , Optical and CO sensing elements
• CO Alarm (COHb) facility
• 10 year CO sensor life
• Programmable fire threshold level

• 7-70 m standard detection range.
• Extensions kits available to enhance detection range up to 160m.
• Fully compatible with the Hochiki ESP analogue addressable protocol.