Quantec Monitoring Point, Button Reset (QT604)

Quantec Monitoring Point, Button Reset

A keyswitch-isolatable monitoring point c/w a reset button for cancelling calls. Can be configured to generate a Standard or Emergency call when a fire exit or drug cupboard is opened (via magnetic contacts) or a telephone or door bell rings. Can be used to monitor any device with a normally open or normally closed switch - ideal for interfacing PIRs, strip switches, flow switches and other devices to Quantec.

QT604M secure magnetic reset version also available

Features

• Red/green reassurance LED
• When isolated, the QT604's reassurance LED will illuminate Green and the monitored door or device may be opened and closed without signalling a call on the system
• Mounts on a standard UK 25mm single gang flush or surface back box

Technical Specifications

• Indicators: Red/Green Reassurance LED (lit green when device is isolated)
• Controls: Isolation keyswitch (switches monitoring off when ISOLATED); Reset button (cancels calls made from the monitoring point and from devices wired on the same Zone). Note that a QT604M magnetic reset version is also available.
• Connections: Net +: Net -; R; G; L+; SW
• Expansion connections: R (Red) and G (Green) connections allow the connection of an optional slave overdoor light. Alternatively G (Green) and SW (Switch) can be used for an optional Call Alert Unit allowing telephone monitoring (see instructions).
• Onboard 6.35mm Remote Jack Socket: No
• Onboard Infrared Receiver: No
• Product dimensions (mm): 87 W x 87 H x 29 D mm. Mounts on a UK 25mm single gang back box.
• Construction & finish: Plastic
• IP Rating: IP41
• Weight: 90g
• Operating conditions/temperature: -5°C to +40°C. Max. relative humidity 95% non-condensing

Downloads

• Datasheet (Adobe PDF)