Orbis Marine TimeSaver Base
£3.29 (inc VAT: £3.95)
Summary
The Orbis Marine TimeSaver Base is a design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedure.
Features
- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Continuity link for zone testing
- Detector locking mechanism
Additional information
| Weight | 0.06 kg |
|---|---|
| Hazardous Applications | |
| Marine Applications | |
| Relay | |
| Short Circuit Isolator | |
| System Type |
Related Products
-
Orbis Marine Optical Smoke Detector
Apollo- Approved for use in marine environments
- Transient rejection for false alarm reduction
- Modern, low-profile design
- Responds well to slow-burning fires
- Good performance in both black and white smoke
- DirtAlert - warns service engineers via a flashing yellow LED that detectors need maintenance
- FasTest - a maintenance procedure that takes just four seconds to test detectors
- SensAlert - a yellow flashing LED indicates faulty operation
- High humidity tolerance at up to 90% RH
- Wide operating temperature -40°C to +70°C
-
Orbis Marine Heat Detector
ApolloThe Orbis Marine Heat Detector uses a single thermistor to sense the temperature around the detector. We have 6 detectors available from the Orbis Marine range designed to suit a variety of operating conditions.
-
Orbis Marine Relay Base
ApolloThe Orbis Marine Relay Base incorporates a single-pole voltage-free changeover contact for switching ancillary equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change state
-
Orbis Marine Multisensor Detector
Apollo- Approved for use in marine environments
- Transient rejection for false alarm reduction
- Modern, low-profile design
- Responds well to fast-burning, flaming fires
- Good performance in both black and white smoke
- DirtAlert, warns service engineers via a flashing yellow LED that detectors need maintenance
- FasTest - a maintenance procedure that takes just four seconds to test detectors
- SensAlert - a yellow flashing LED indicates faulty operation
- High humidity tolerance at up to 90% RH
- Wider operating temperature -40°C to +70°C