SmartConnect Multi-Loop Multi-Relay Output Module
£137.08 (inc VAT: £164.50)
Summary
The SCM-RM is a relay module that is designed to be DIN mounted inside a Smart Connect Multiloop panel. It’s powered and is interfaced to the panel via a RJ45 connection.
The module has three form C relays which can be typically used to control lift operation during an alarm, start fire pumps or stop ventilation fans etc..
Each relay output can be configured as a common alarm, common fault, common technical alarm or as a programmable output, controlled via cause and effect programming.
Features
- Designed to EN54 Part 2
- 3 x Form C relay outputs
- Each relay can be programmed to activate on Alarm, Technical Alarm, or Fault.
- Extensive front unit indications (see datasheet)
- Quick and easy to install by plugging the RJ45 cable into the module and control panel (cable supplied with Unit)
Specifications
- Relay Type: Form C x 3
- Switching Capacity: 5A, 30VDC (resistive)
- Operating Temperature: -5°C to 40°C
- Max Humidity: 93% Non-Condensing
- Size (mm) (HxWxD): 103mm x 97mm x 46mm
- Weight: 0.2 KG
- Terminal Wiring Size: (0.8mm2 to 2.5mm2)
- Relay Modes: Common alarm, common fault, common technical alarm or Programmable
Downloads
- Datasheet (Adobe PDF)
- Installation Manual (Adobe PDF)
Additional information
| Weight | 0.2 kg |
|---|