Lexicomm ViLX-ACP-66 Weatherproof Assist Call Cancel Button (ViLX-ACP-66)

Lexicomm ViLX-ACP-66 Weatherproof Assist Call Cancel Button

The ViLX-ACP-66 is used to cancel the alarm when additional cancel buttons are required. It is suitable for showers and other wet areas where a standard cancel button may be unsuitable.

The cancel button is finished in brushed stainless steel without visual indication, so it should be used in conjunction with another cancel button or cancel plate which has visual indication.

Operation

The button is a momentary sprung switch which cancels the alarm when pressed.

Up to 2 x ancillary cancel buttons can be used in the circuit, for further advice please refer to Vox Ignis technical dept for guidance.

Mounting information

It should be mounted at between 800mm to 1000mm with a lower call button mounted at 100mm from the floor.

There are 5 x 20mm cable entries provided, at top, bottom and side entry, cable entry for the rear via cut-out is also provided. See drawings overleaf for full details.

Wiring information

For simplicity, all wiring is a standard two core cable, the wiring order of the devices is not fixed and therefore can be wired in any order to give total flexibility.

Features

• IP66 weatherproof enclosure.
• Ideal for showers/wet areas.
• Stainless fascia.
• Polycarbonate back box.
• Flush or surface mounting.
• BS 8300-2:2018 “Acknowledge” feature.

Specifications

• Recomended Cable Type : PVC or Fire Rated* (*If connected to a Refuge Point)
• Cores : 2 core 1mm CSA
• Distance : 500m from compatible panel/ controller
• EMC : EN 55035:2017+A11:2020
• LVD : EN IEC62368-1:2020 +A11:2020
• Product Family :
  • BS 5839-9:2021
  • BS 8300-2:2018
• Material : Stainless steel/acrylic
• Finish : Brushed
• Dimensions (HxWxD) : 100x100x60mm
• Weight : 250g

Downloads

• Datasheet (Adobe PDF)