ClickExpose

Fike Twinflex Multipoint Detector With or Without Sounder

Fike

This product has been superseded by another model

Fike Twinflex Multipoint Detector With or Without Sounder

This product is now obsolete, and has been replaced with Twinflex ASD Detectors

Specifiers and installers who choose the Fike Multipoint detector do so secure in the knowledge that the fire detection performance detector can be matched to the environment in which it is installed -and charged at anytime during the lifetime of the installation.

The mode of detection required can be simply set by configuring the DLL switch in the detector electronics module.  All modes are compliant with European detector type specifications, and are suitable for use in installations compliant with BS5839: Part 1: 2002.

Modes of Detection

Smoke 1

Highly thermally enhanced optical
Used where ionisation detectors are normally fitted, especially when there are high ceilings or a risk of free burning fires.

Smoke 2

Thermally enhanced optical
Used where optical detectors are normally fitted, when there isa  risk of a smouldering fire and for escape routes.

Smoke 3

Thermally enhanced optical with pulse rejection
Used where optical detectors are normally used in positions expose to brief concentrations of water vapour or smoke e.g. from a bathroom, kettle etc.

Heat 1

Rate of Rise to 58oC
Used where a standard rate of rise detector would normally be used.

Heat 2

Low fixed temperature 58oC
Used where a standard fixed temperature heat detector would normally be fitted, suitable for kitchens etc.

Heat 3

High fixed temperature 90oC
Used where a high fixed temperature heat detector would normally be fitted, suitable for boiler rooms, commercial kitchens etc.

Surface Mount Installation

For surface mount installation of the Twinflex detectors you will require an additional Multipoint detector deep back box.

Frequently Asked Questions

What requirements do the Twinflex Multipoint Detectors meet?

Our Fike Twinflex Multipoint Detectors With and Without Sounders meet the requirements of EN54-5 and EN54-7 :2000.

What is a Twinflex Multipoint Detector?

A Twinflex Multipoint detector is a single device offering up to seven different modes of operation.

There are two high performance fire sensors incorporated within the Fike Multipoint fire detector, they are; Optical scatter smoke sensor and a Heat sensor.

The device is available with or without an integral sounder, but is otherwise universal in it's application.

What is the sound output level of the Twinflex Multipoint Detector?

The twinflex Multipoint Detector can alarm at two levels;

Low @ 75dB

High @ 90dB

Industry standard BS 5839 recommends a general alarm sound level of 65dB throughout the building, and 75dB at the bedhead where people are sleeping.  The detector intergral sounder provides a 'normal' level of 90dB at one metre which easily satisfies this requirement within individual rooms.

Are the Twinflex Multipoint Detectors compatible with other brand panels?

The Twinflex Multipoint Detectors are only compatible with the Fike range of panels.

Can the Fike Twinflex Multipoint Detector with Sounder be surface mounted?

Yes, however for surface mount installation of the Twinflex detectors you will require an additional Multipoint detector deep back box.

Fike Twinflex Multipoint Detector Downloads

Same Day Dispatch
Lowest Price Guaranteed
Free UK Delivery over £200*
Secure Online Order Processing
Free Technical Support

Newsletter Signup

Enter your details and we'll occasionally send you special offers and product news.