Hochiki ESP Addressable Manual Call Point in Yellow (HCP-E/Y)

Hochiki ESP Addressable Manual Call Point in Yellow

Model HCP-E/Y is a Manual Call Point, which is fully compatible with Hochiki’s ESP analogue addressable protocol.

The HCP-E/Y incorporates a red LED mounted on the front cover, which can be selected as pulsing/non-pulsing* for communications polling and is continuously lit when the HCP-E/Y is operated.  The unit is operated by pressing the EN54 compliant non-frangible (plastic) element and, once operated, produces a high level ESP interrupt, allowing the control panel to respond very quickly.  A built in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested by insertion of a test key in the underside of the unit. Two terminal blocks are provided for easy connection to the loop wiring.

The unit is addressed using the TCH-B100 Hand Held Programmer for quick and reliable addressing.  The unit can be flush mounted as supplied.  For surface fixing a suitable back box such as the SR MOUNTING BOX is required (sold separately).  An optional glass element is also available.

Features

• Fast response
• Status LED
• Non-frangible element fitted as standard (conforms to EN54)
• Addressed with TCH-B100 Hand Held Programmer
• Surface or flush mounting (if surface mounting, requires SR MOUNTING BOX, sold separately)
• LPCB Approved to EN54

Specifications

• Operating Voltage : 17-41 VDC
• Quiescent Current : 220uA
• Alarm Current : 5.0mA
• Ingress Protection : IP24
• Approval : LPCB EN54-11

Downloads

• Datasheet (Adobe PDF)