Apollo XP95 I.S. Heat Detector (55000-440)

Apollo XP95 I.S. Heat Detector – 55000-440APO

The XP95 IS Heat Detector is distinguishable from XP95 IS smoke detectors by its low air-flow resistance case which allows good contact between the sensing thermistor and the surrounding air. The device monitors temperature by using a single thermistor network which provides a voltage output proportional to the external air temperature.

The voltage signal is processed and transmitted to the control equipment in the same way as in the case of the ionisation smoke detector. Full details of the principles of operation and the electrical description are published in the XP95 Engineering Product Guide. XP95 IS detectors have the same operating characteristics as the standard versions.

Features

• Rate of rise and fixed temperature alarm point.
• Single thermistor technology.
• Transient voltage protection.
• Resettable operation.
• Lockable security fitting.

Specifications

• Fire Type: Ideal for environments that are dirty or smoky under normal circumstances
• Supply Voltage: 14 - 22 V
• Supply Wiring: Two-wire supply, polarity sensitive
• Terminal functions: L1 Positive supply; L2 Negative supply and remote; LED negative; +R Remote LED positive
• Alarm Indicator: Red light-emitting diode (LED)
• Quiescent Current: 300μA
• Remote LED Current: 1 mA (internally limited)
• Humidity: 0% to 95% RH (no condensation or icing)
• Approvals: EN54, MED, LR, BV, ABS, CCS, KRS, VdS, CCCf, BOSEC, VNIIPO, SBSC, EAC, PESO, ATEX and IECEX
• Weight: 105g, 157g with base
• Materials Housing: Housing: White flame retardant polycarbonate. Terminals: Nickel-plated stainless steel
• Product Dimensions: 100 mm diameter x 42 mm height (50 mm height with mounting base)
• Detection Principle: Linear approximation over temperature range 25OC to 90OC.
• Sensor: Sensor Single NTC thermistor

Downloads

• Datasheet (Adobe PDF)
• Installation Manual (Adobe PDF)