XP95 I.S. Manual Call Point
£209.30 (inc VAT: £251.16)
Summary
The XP95® IS Manual Call Point has been designed to operate on a loop of intelligent fire detection devices and when activated interrupts the polling cycle for a very fast response. When activated, the intrinsically safe call point not only interrupts the polling cycle to indicate to the control panel that it has been operated, but also reports its address. Thus an alarm and its location can be reported in less than 0.2 seconds. Full details of the principles of operation and the electrical description are published in the XP95 Engineering Product Guide.
XP95 IS manual call points have the same operating characteristics as the standard versions. They are available in two types of housing and in a number of versions. Designed specifically for use in atmospheres in which explosive mixtures are or may be present, certain design considerations must be observed. The standard red IS manual call point is EN54-11:2001 compliant and has a resettable element. The range uses an IP67 weatherproof polycarbonate housing and is available in colours other than red. A transparent hinged cover part no: 26729-152 is available for protection against accidental operation.
Features
- Plug and Play’ terminal connections for fast wiring
- Continuity link for wiring test before commissioning
- Reports an alarm in under 0.2 seconds
- Resettable element
Specifications
- Warranty: 10 years
- Protocol Voltage (Min) : 5V
- Protocol Voltage (Max): 9V
- Protocol Voltage: 5 to 9V peak to peak
- Power-Up Surge Current: 1mA
- Quiescent Current: 300μA
- Quiescent Current Tested At: L1 & L2 are polarity sensitive
- Humidity (Min): 0% RH
- Humidity (Max): 95% RH
- IP Rating Value: IP67
- Weight: 240g
- Colour: Red
- Materials Housing: Polycarbonate ABS
- Dimensions (LxWxD): Controller: 97.5 x 93 x 71mm
- Detection Principle: Controller: Operation of a switch
- Key Type: KAC Manal Call Point test & reset key
Downloads
- Datasheet (Adobe PDF)
Additional information
| Weight | 1 kg |
|---|