Shopping Basket

0 Items

Subtotal £0.00

System Sensor 52051 Low Profile Addressable Heat Sensor

£36.84£41.93

SKU: d17a8397dddf Category: Brand:

Summary

The revolutionary Series 200 Advanced range delivers a totally new detector platform that incorporates the new digital Series 200 Advanced Protocol. The new Protocol delivers more devices on the loop and gives greater control, configurability and device management whilst enabling the overall system to be optimised to the location and use of the building with far greater flexibility than ever before.

The 52051E and 52051HTE are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58°C (Class A1S) to 78°C (Class BS). The 52051RE uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10°C/minute (typical) or if the temperature exceeds a threshold of 58°C (Response Class A1R). With the implementation of the Series 200 Advanced Protocol, any model can be software configured to be either a fixed 58°, a fixed 78° unit or a 58° with rate of rise device. For backwards compatibility and approval continuity, three separate versions continue to be available as separate part numbers.

The sensing elements of all three heat sensors are panel controllable through the Series 200 Advanced Protocol so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting. The 22051TE has two integral tri-colour LEDs that provide 360° local visual indication of the device status. The LEDs are programmable with static or blinking red, amber and green status indications available.

All Series 200 Advanced detectors are environmentally friendly and meet the WEEE and RoHS legislative requirements, minimising end of life disposal costs, and are mechanically and electrically backwards compatible with existing Series 200 plus devices.

Features

  • 58° & 78° fixed temperature and rate of rise heat detectors
  • Includes Series 200 Advanced Protocol
  • Available with or without single pole short circuit isolation with status control through the Series 200 Advanced Protocol
  • Tri colour LED offering red, green and amber colours
  • Rotary decade address switches
  • Pure white colour to compliment modern buildings
  • 100% mechanical and electrical backwards compatibility
  • New Base design to compliment the detector

Specifications

Electrical Specifications – Standard Product (52051E)

  • Operating Voltage Range : 15 to 32Vdc
  • Maximum Standby Current : 200µA at 24VDC (no communications) / 300µA at 24VDC ( LED blink enabled, once every 5s)
  • Led Current :
    • Red : 3.5mA at 24Vdc
    • Green : 7.0mA @ 24Vdc
    • Yellow : 10.5mA @ 24Vdc
  • Remote Output Voltage : 22.5Vdc @ 24Vdc
  • Remote Output Current : 10.8mA @ 24Vdc
  • Additional loop resistance using the B501AP : typ 20mohm (max 30 mohm)

Environmental Specifications

  • Temperature Range : -30°C to +70°C †
  • Humidity : 10 to 93% relative Humidity (non-condensing)

Heat Detection Performance

  • 52051RE / REI : Class A1R – 58°C fixed temperature and rate of rise
  • 52051E / EI : Class A1S – 58°C fixed temperature
  • 52051HTE / HTEI : Class BS – 78°C fixed temperature

Mechanical Information

  • Height : 61mm installed in B501 base
  • Diameter : 102mm installed in B501 base
  • Weight : 88g (excluding base)
  • Max Wire Gauge for Terminals : 2.5mm2
  • Colour : White
  • Material : PC/ABS

Downloads

Additional information

Weight 0.1 kg
Class

A1R – Rate Of Rise, A1S – 58 Deg Fixed, BS – 78 Deg Fixed

Colour

Detection Type

Device Type

Hazardous Applications

Marine Applications

Protocol

System Type

Related Products