Vesda-E VEA 40 Relay Local STAX
£2,004.00 (inc VAT: £2,404.80)
Summary
The VESDA-E VEA Local Relay StaX allows signaling of alarm location from the detector via relays and provides mounting of fire panel loop input modules inside the enclosure. It is directly powered and controlled from the detector. Depending on the configuration a VEA detector can power and control up to three (3) Relay StaX. Each Relay StaX provides 40 relay connections corresponding to 40 tubes on a VEA detector providing full addressability.
Installation:
The Relay StaX features a robust IP40-rated enclosure. The Relay StaX has the same dimensions as the VEA detector making it easy to install. It can be mounted above or below the detector. A spacer is provided to precisely align the Local Relay StaX mounting bracket with the detector mounting bracket, the same spacer is used to provide correct spacing in case of direct mounting to the wall. The Relay StaX is fully supported by the Xtralis VSC software package for commissioning and maintenance.
Features
- 40 relays
- Each relay responds to a smoke event located on one tube of the detector
- Provides for mounting of loop modules inside enclosure
- IP 40 enclosure (not UL tested)
- Easy mounting with optional steel support bracket
Specifications
- Supply Voltage: 18 to 30 VDC (24 VDC Nominal)
- Power Consumption @ 24VDC: Average Quiescent: 20 mA; Average Alarm: 250 mA
- Dimensions (WHD): 352.05 mm x 340.5 mm x 135.5 mm
- Weight: 5.1 kg
- Operating Conditions:
- Ambient: 0°C to 39°C (32°F to 102°F)
- Tested to:
- EN 54-20: -10°C to +55°C (+14°F to +131°F)*
- UL: 0°C to +49°C (+32°F to +120°F)
- Humidity: 10% to 95% RH, non-condensing
- Relay:
- 40 relays
- Contacts rated 2 A @ 30 VDC (Resistive)
- Programmable to latch or not latch
- IP Rating: IP40 (not UL tested)
- Cable Access: 4 x 25 mm (1”) cable entries
- Cable Termination: Screw terminal blocks (0.2-1.5 sq mm, 24-16 AWG)
Downloads
- Datasheet (Adobe PDF)
Additional information
| Weight | 3 kg |
|---|