Kentec Syncro Focus & Focus+

Kentec Syncro Focus & Focus+ Network LCD Repeater Panels

This simple and attractive repeater panel can be connected to any point on a Syncro network to provide additional display points as needed.

Using the same large format graphics display as the main control panel ensures that a clear and concise indication is given at all times.

Ideal for additional building entrances, security desks or nurses stations this unit provides an economical alternative to a full function repeater panel. (Syncro Response) The repeater also acts as a network booster and can be used to extend cable runs beyond the specified lengths as required.

Key Features

• Large graphic display.
• Simple connection to Syncro network.
• 24V DC powered (230V AC available).
• Small attractive enclosure.
• Configurable to display all or any events.
• Simple to install.
• Volt free Alarm, Fire and Fault contacts.
• Up to 63 repeaters can be connected to a panel.
• Focus+ with full controls has the following extra buttons:
• Silence Alarm
• Resound Alarm
• Reset

Technical Specification

• Construction : 1.2mm mild sheet steel
• IP Rating : IP30
• Finish : Epoxy powder coated
• Colour - Lid & Box : BS 00 A 05 grey - fine texture
• Colour - Controls Plate & Labels : Ral 7047 light grey - satin
• Display : 8 lines of 40 characters graphic LCD
• Input Voltage (24V DC Model) : 21V DC - 30V DC
• Input Voltage (230V AC Model) : 230V AC +10%/-15%
• Current Consumption : 80mA at 24V DC (in fault condition)
• Alarm Current : 100mA at 24V DC
• Alarm Contact Rating : 30V DC 1 Amp max.
• Fire Contact Rating : 30V DC 1 Amp max.
• Fault Contact Rating : 30V DC 1 Amp max.
• Display : 240 x 64 pixel graphic LCD
• Cable Entry : 20mm knockouts
• Indicators : 5mm high brightness LED
• Battery Size : 2.3Ah 12V (2 per panel) (24 hr. standby on 230V AC model)
• Communications : Syncro system network protocol only
• Cable Length : 1200 metres to adjacent nodes (subject to cable type - see technical manual)
• Network Cable Type : Belden 9271, Belden 9860, FP200 Gold
• Operating Temperature : -5°C to +40°C

Downloads

• Datasheet (Adobe PDF)