Sigma CP Sounder Controller Unit

Kentec

    • (Exc. VAT: )
      • In Stock
    Add To Basket

    Sigma CP Sounder Controller Unit

    The Sigma CP Sounder Board is compatible with all Sigma CP control panels which have operating software version V3.0 or above.

    The board provides 8 additional sounder outputs which can be configured as zoned, 2-stage or common alarm. All sounder outputs are open and short circuit monitored and any faults on the sounder outputs will be announced at the main fire alarm panel as a sounder fault.

    A class change input is provided which, when activated by a volt free contact closing, will switch all sounder outputs on.

    Up to 7 Sounder boards can be connected to a control panel and each is allocated an address from 1 to 7 using a binary coded DIL switch. Sounder boards may be connected to the Sigma CP serial bus in addition to Sigma CP ancillary boards and Sigma CP-R repeater panels.

    The total length of the data cable from the main panel to the last repeater must not exceed 1200 metres.

    Key Features

    • Two wire serial connection
    • 230V AC or 24V DC powered versions
    • All outputs monitored for open and short circuit faults
    • Fully monitored by main control panel
    • Up to 8 outputs with 1A available from each
    • Boxed units in enclosure to match Sigma CP control panels
    • Up to 7 sounder boards per system
    • Zoned, 2-stage or common alarm
    • Individual open and short circuit fault indicators
    • Class change input facility
    • Can be connected to serial bus with Ancillary boards and repeaters
    • Power fault input for monitoring remote power supplies

    Technical Specifications

    • Construction (Boxed): 1.2mm mild steel
    • IP Rating (Boxed): IP30
    • Finish: Epoxy powder coated
    • Colour - lid & box: BS 00 A 05 grey - fine texture
    • Supply Voltage (K04400M2): 230V AC (+10%/-15%)
    • Supply Voltage (K04000M2): 20-30V DC
    • Mains supply fuse: 1.6A 250V
    • Power supply DC rating: 24V 5.25 Amp
    • Sounder output rating: 1A per output
    • Class change input: Volt free NOC
    • Cable capacity: 2.5mm² per terminal
    • Operating temperature: -5°C to +50°C
    • Operating humidity: <95% (non condensing)

    Downloads

    Same day delivery

    Same Day Dispatch

    Free UK Delivery Over £150*

    Free UK Delivery Over £150*

    Lowest Price Guaranteed

    Lowest Price Guaranteed

    Secure Online Order Processing

    Secure Online Order Processing

    Same Day Dispatch
    Lowest Price Guaranteed
    Free UK Delivery over £150*
    Secure Online Order Processing
    Free Technical Support

    Newsletter Signup

    Enter your details and we'll occasionally send you special offers and product news.