Orbis Marine Heat Detector
£17.39
Summary
Orbis Marine Conventional Fire Detectors offer a multitude of features to save time, enhance reliability and reduce false alarms within the marine environment.
Like all of the Orbis Marine range of smoke and heat detectors, the Orbis Marine Heat Detector is approved for use in marine applications. Orbis Marine products operate in the same way as standard devices but are subject to additional approvals and test specific to the marine environment.
The Orbis Marine Heat Detector uses a single thermistor to sense the temperature around the detector. We have 6 detectors available from the Orbis Marine range designed to suit a variety of operating conditions:
- Orbis Marine Class A1R Heat Detector
- Orbis Marine Class A2S Heat Detector
- Orbis Marine Class BR Heat Detector
- Orbis Marine Class BS Heat Detector
- Orbis Marine Class CR Heat Detector
- Orbis Marine Class CS Heat Detector
Please select the required variation from the drop-down list above.
Please note, all Orbis Marine Detectors require an Orbis Marine Base in order to be mounted.
Approvals
Orbis marine detectors are approved by the following bodies:
- Lloyd’s Register of Shipping
- Maritime and Coastguard Agency
- American Bureau of Shipping
- Bureau Veritas
- Det Norske Veritas
- Germanischer Lloyd
Choosing a Heat Detector
Features
- Approved for use in marine environments
- Transient rejection for false alarm reduction
- Modern, low-profile design
- FasTest – a maintenance procedure that takes just four seconds to test detectors
- SensAlert – a yellow flashing LED indicates a faulty operation
- High humidity tolerance at up to 90% RH
- Wider operating temperature -40°C to +70°C
Specifications
- Operating Voltage: 8.5 to 33 VDC
- Quiescent current: 65µA at 24 VDC
- Alarm current: 40mA at 24 VDC
- Remote output: 1.2kΩ to -ve supply
- Dimensions including base (D x H mm): 100 x 51mm
- Operating temperature: -40°C to +70°C (no icing)
- Relative humidity: 0 to 98% (non condensing)
- IP rating: IP23D
- Weight: 70 grams (130g including base)
Downloads
- Datasheet (Adobe PDF)
Related Products
-
Orbis Marine Multisensor Detector
Apollo- Approved for use in marine environments
- Transient rejection for false alarm reduction
- Modern, low-profile design
- Responds well to fast-burning, flaming fires
- Good performance in both black and white smoke
- DirtAlert, warns service engineers via a flashing yellow LED that detectors need maintenance
- FasTest - a maintenance procedure that takes just four seconds to test detectors
- SensAlert - a yellow flashing LED indicates faulty operation
- High humidity tolerance at up to 90% RH
- Wider operating temperature -40°C to +70°C
-
Orbis Marine Optical Smoke Detector
Apollo- Approved for use in marine environments
- Transient rejection for false alarm reduction
- Modern, low-profile design
- Responds well to slow-burning fires
- Good performance in both black and white smoke
- DirtAlert - warns service engineers via a flashing yellow LED that detectors need maintenance
- FasTest - a maintenance procedure that takes just four seconds to test detectors
- SensAlert - a yellow flashing LED indicates faulty operation
- High humidity tolerance at up to 90% RH
- Wide operating temperature -40°C to +70°C
-
Orbis Marine TimeSaver Base
ApolloThe Orbis Marine TimeSaver Base is a design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedure.
-
Marine Series 65 Mounted UV Flame Detector
ApolloThe Marine Series 65 Base Mounted UV Flame Detector is designed to protect internal areas where flaming fires might be expected, detecting UV radiation that is emitted by flames.
-
Orbis Marine Relay Base
ApolloThe Orbis Marine Relay Base incorporates a single-pole voltage-free changeover contact for switching ancillary equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change state