Fyreye MkII Addressable Sounder Control Module With Isolator
£42.84 (inc VAT: £51.41)
Summary
The ZASC-MI is supplied in a modern enclosure (2 gang box size) with well protected electronic circuit board to minimize any damages during installation. It is supplied with a back box suitable for surface mount indoor installation. Designed and manufactured to meet the requirement of EN54-18 2005 and EN54-17 2005.
The ZASC-MI can be used to supply a monitored 24Vdc to operate external relays and as a conventional sounder circuit to run bells or beacon flashers where the current consumption prohibits the use of addressable loop powered devices. The unit also includes input connections to monitor the external power supply status and report the findings to the addressable control panel.
Features
- This is not a loop powered device and an adequate 24Vdc input (with battery backup) is needed.
- Hand addressed using the 8 way dip switch OR Softly addressed using our handheld MKII Programmer (part no. MKII-TOOL)
- Equipped with short circuit line isolator
Specifications
- Part Number: ZASC-MI
- Operating Voltage (Loop): 17-28V DC
- Quiescent Current (Loop): 0.6mA
- Fault Current (Loop): 0.6mA
- Sounder On Current (Loop): 0.8mA
- Operating Voltage (Ext. Power): 9-32V DC
- Quiescent Current (Ext. @ 24V): 2 mA
- Sounder On Current (Ext. @ 9V): 2.5mA Plus Sounder Load
- Sounder On Current (Ext. @ 32V): 9.5mA Plus Sounder Load
- Sounder Output Rating: 500 mA
- Isolating Current: 7.3mA
- Sounder End of Line: 10k
- Operating Temperature: -10C to 55C
- Max Humidity: 95% RH Non Condensing
- IP Rating: IP21C
- Size: 150 x 90 x 45 mm
- Weight: 220g
Downloads
- Datasheet (Adobe PDF)
- Installation Manual (Adobe PDF)
Additional information
| Weight | 2 kg |
|---|