ClickExpose

Hydrosense Conventional Water Detection Control Panel

Vimpex

    • (Exc. VAT: )
      • In Stock
    Add To Basket

    Hydrosense Conventional Water Detection Control Panel

    Ideal for small and medium sized installations. 2, 4 and 8 Zone control panels are available, with all variants featuring battery standby as well as common fault and alarm relay contacts. Simple to install and maintain. Detection and Sounder circuits constantly monitored for faults. RS485 data bus allows both zonal contacts and repeater panels to be incorporated battery backup.

    How It Works

    Hydrosense leak detection systems are designed to protect areas where water ingress could seriously damage electrical, communication and computer networks. It continuously monitors for water leaks around the clock, year in year out and has the facility for 72 hour battery standby in the event of power failure. Should a leak be detected the control panel sounds an alarm which can be extended to a remote location. When an alarm is raised, Hydro-Cryer® voice sounders can be used to broadcast an unambiguous message, avoiding confusion with other sounders on site.

    The new Hydrosense systems provide both linear detection using Hydrowire and point detection using probes. Linear detection Hydrowire is a flexible cable which will continuously monitor large areas. When even a small amount of water or moisture comes into contact with Hydrowire it will trigger an alarm. Point detection is provided by Hydrosense floor or drip tray probes, these are fixed to the floor or drip tray and adjusted to give the required detection level and connected to the control panel via a Hydrosense water leak detection module.

    Utilising life safety technology in the design of Hydrosense provides the reliability and integrity of BSi approved fire detection systems, meaning there is virtually no risk of failure, downtime and significantly fewer false alarms.

    Typical System Diagram

    Hydrosense Conventional Typical Wiring Diagram

    Features

    • Ideal for small and medium sized installations.
    • 2, 4 and 8 zone control panels available, with all variants featuring battery standby as well as common fault and alarm relay contacts.
    • Simple to install and maintain.
    • Detection and Sounder circuits constantly monitored for faults.
    • RS485 data bus allows both zonal contacts and repeater panels to be incorporated.
    • Battery backup (requires additional 12V SLA batteries).

    Frequently Asked Questions

    What wiring is used between the control panel and Hydro-Probe or Hydro-Wire interface?

    How many interfaces can be installed per zone?

    Same Day Dispatch
    Lowest Price Guaranteed
    Free UK Delivery over £200*
    Secure Online Order Processing
    Free Technical Support

    Newsletter Signup

    Enter your details and we'll occasionally send you special offers and product news.