VESDA-E VEP Aspirating Smoke Detector
£1,999.80 – £3,019.80
Summary
The VESDA-E VEP series of smoke detectors bring the latest and most advanced detection technology to provide very early warning and the best nuisance alarm rejection to a wide range of applications. Built on the Flair detection technology and years of application experience, VEP detectors achieve consistent performance over their lifetime via absolute calibration. In addition, the VEP delivers a range of revolutionary features that provide user value.
Flair Detection Technology
Flair is the revolutionary detection chamber that forms the core of the VESDA-E VEP, providing higher stability and increased longevity. Direct imaging of the sampled particles using a CMOS imager combined with multiple photo-diodes allows better detection and fewer nuisance alarms.
Installation, Commissioning and Operation
VESDA-E VEP is equipped with a powerful aspirator that enables use of
a total of 130m (427ft) of sampling pipe in the one pipe model and 560m (1,837ft) of pipe in the four pipe model. Out of box operation is made possible with AutoConfig which allows airflow normalisation and AutoLearn Smoke and Flow to be initiated from within the detector. VEP is fully supported by the ASPIRE and Xtralis VSC software applications which facilitate ease of pipe network design, system commissioning and maintenance.
VESDAnet
VESDA devices communicate on VESDAnet which provides a robust bi- directional communication network allowing continued redundant operation even during single point wiring failures. VESDAnet enables primary reporting, centralized configuration, control, maintenance and monitoring.
Ethernet and WiFi connectivity
VESDA-E detectors offer Ethernet and WiFi connectivity as standard features. The detector can be added to a corporate network, allowing WiFi enabled tablet devices and PC’s installed with Xtralis monitoring and configuration software to connect wirelessly to the detector via the network.
Backward Compatibility
VESDA-E VEP is compatible with existing VESDA installations. The detector occupies the same mounting footprint, pipe, conduit and electrical connector positioning as VESDA VLP. VEP is also compatible with existing VESDAnet installations allowing monitoring of both VESDA-E and legacy detectors via the latest iVESDA application.
Applications
- Accommodation (Apartments, Hotels, Shops and Offices)
- Correctional Facilities
- Clean Rooms
- Cold Storage
- Cultural/Heritage
- Data & Telecom
- Education
- Hospitals & Healthcare
- Insurance
- Marine
- Nuclear Facilities
- Offices
- Oil & Gas
- Portable Switch Rooms
- Power Generation
- Records Storage
- Retail
- Transportation
- Wind Power Generation
- Warehousing
- And more…
Features
- One and four pipe models for different applications.
- Flair detection technology delivers reliable very early warning in a wide range of environments with minimal nuisance alarms.
- Multi stage filtration and optical protection with clean air barriers ensures lifetime detection performance.
- Four alarm levels and a wide sensitivity range deliver optimum protection for the widest range of applications.
- Intuitive LCD icon display provides instant status information for immediate response.
- Flow fault thresholds per port accommodate varying airflow conditions.
- Smart on-board filter retains dust count and remaining filter life for predictable maintenance.
- Extensive event log (20,000 events) for event analysis and system diagnostics.
- AutoLearn™ smoke and flow for reliable and rapid commissioning.
- Referencing to accommodate external environmental conditions to minimise nuisance alarms.
- Fully backward compatible with VLP and VESDAnet.
- Remote monitoring with iVESDA for system review and proactive maintenance.
- Ethernet for connectivity with Xtralis software for configuration, secondary monitoring and maintenance.
- Industry first. Aspirating detector secondary monitoring and maintenance via WiFi.
- USB for PC configuration, and firmware upgrade using a memory stick.
- Two programmable GPIs (1 monitored) for flexible remote control.
- Field replaceable sub-assemblies enable faster service and maximum uptime.
Video
Specifications
- Supply Voltage : 18-30 VDC (24 V Nominal)
- Power Consumption :
- VEP-A00-1P :
- Aspirator Setting : Fixed
- Power (Quiescent) : 8.8 W
- Power (In Alarm) : 9.6 W
- VEP-A00-P :
- Aspirator Setting : 1
- Power (Quiescent) : 7.0 W
- Power (In Alarm) : 7.8 W
- VEP-A00-P :
- Aspirator Setting : 5
- Power (Quiescent) : 8.8 W
- Power (In Alarm) : 9.6 W
- VEP-A10-P :
- Aspirator Setting : 1
- Power (Quiescent) : 8.2 W
- Power (In Alarm) : 10.4 W
- VEP-A10-P :
- Aspirator Setting : 5
- Power (Quiescent) : 10.0 W
- Power (In Alarm) : 11.6 W
- Current Consumption : 415 mA quiescent, 440 mA with alarm (max)
- Fuse Rating : 1.6 A
- Dimensions (WHD) : 426.5 mm x 316.5 mm x 180 mm (16.8 in x 12.5 in x 7.1 in)
- Weight :
- VEP-A00-1P : 4.0 kg (8.8 lb)
- VEP-A00-P : 4.0 kg (8.8 lb)
- VEP-A10-P : 4.1 kg (9.0 lb)
- Operating Conditions :
- Ambient : 0°C to 39°C (32°F to 102°F)
- Sampled Air : -20°C to 60°C (-4°F to 140°F)
- Tested to :
- -20°C to 55°C (-4°F to 131°F)
- UL: -20°C to 50°C (-4°F to 122°F)
- Humidity : 5% to 95% RH, non-condensing
- Area Coverage :
- VEP-A00-1P : 1,000 m2 (10,760 sq. ft)
- VEP-A00-P : 2,000 m2 (21,520 sq. ft)
- VEP-A10-P : 2,000 m2 (21,520 sq. ft)
- Min Airflow Per Pipe : 15 l/m
- Pipe Length (Linear) :
- VEP-A00-1P : 100 m (328 ft)
- VEP-A00-P : 280 m (919 ft)
- VEP-A10-P : 280 m (919 ft)
- Pipe Length (Branched) :
- VEP-A00-1P : 130 m (427 ft)
- VEP-A00-P : 560 m (1,837 ft)
- VEP-A10-P : 560 m (1,837 ft)
- Pipe Lengths Depending On Number Of Pipes In Use :
- 1 Pipe : 100 m (328 ft)
- 1 Pipe : 110 m (361 ft)
- 2 Pipe : 100 m (328 ft)
- 3 Pipe : 80 m (262 ft)
- 4 Pipe : 70 m (230 ft)
- StaX :
- VEP-A00-1P : PSU
- VEP-A00-P : PSU, Auto Pipe Clean
- VEP-A10-P : PSU, Auto Pipe Clean
- No Of Holes (A/B/C) :
- VEP-A00-1P : 30/40/45
- VEP-A00-P : 40/80/100
- VEP-A10-P : 40/80/100
- Computer Design Tool : ASPIRE
- Pipe :
- Inlet: External diameter 25 mm or 1.05 in (3/4 in IPS)
- Exhaust: External diameter 25 mm or 1.05 in (3/4 in IPS) via adaptor
- Relays : 7 programmable relays (latching or non-latching states) Contacts rated 2 A @ 30 VDC (Resistive)
- IP Rating : IP40
- Cable Access : 4 x 26 mm (1.02 in) cable entries
- Cable Termination : Screw Terminal blocks 0.2–2.5 sq mm (24–14 AWG)
- Dynamic Range : 0.001% to 32% obs/m (0.0003% to 10% obs/ft)
- Sensitivity Range : 0.005 to 20% obs/m (0.0016% to 6.25% obs/ft)
- Threshold Setting Range :
- Alert: 0.005% to 2.0% obs/m (0.0016% to 0.625% obs/ft)
- Action: 0.005% to 2.0% obs/m (0.0016% to 0.625% obs/ft)
- Fire1: 0.010% to 2.0% obs/m (0.0031% to 0.625% obs/ft)
- Fire2: 0.020% to 20.0% obs/m (0.0063% to 6.25% obs/ft)
- Software Features :
- Event log: Up to 20,000 events
- Smoke level, user actions, alarms and faults with time and date stamp
- AutoLearn: Detector learns Alarm Thresholds and Flow Fault thresholds by monitoring the environment.
Downloads
- Datasheet (Adobe PDF)
Related Products
-
Mounting Bracket For VESDA-E Aspiration Detectors
Xtralis- Mounting bracket for VESDA-E aspiration detectors.
- Compatible with the VEP, VES, VEU and VEA ASDs.
-
Aspirator For VESDA-E Aspiration Detectors
Xtralis- Replacement aspirator for VESDA-E aspiration detectors.
- Compatible with the VEP, VES, VEU and VEA ASDs.
-
VESDA-E STX Power Supply Unit
Xtralis- Available in 0.5 or 2.0 amp sizes.
- Choice of matt block or silver finish.
- Designed to blend in with VESDA-E detectors.
- Knockouts designed to line up with VESDA-E detectors.
-
VESDA-E Filter Cartridge
Vesda- Easy swap replacement filter.
- Suitable for use with VESDA-E VEP, VEU detectors.
- Available singly or in packs of 20.