Kentec Sigma CP Sav-Wire Two-Wire Fire Alarm Panel
£231.92 – £272.80
Summary
The Kentec Sigma CP Sav-Wire is a Fire Alarm Control Panel from the Sigma CP range of two wire fire alarm control panels.
This panel allows the installation of detectors, call points, sounders and beacons all on the same zone circuit. This allows a reduction in installation costs and time when compared to traditional conventional fire alarm systems that require seperate detection and sounder circuits.
The Kentec Sigma CP Sav-Wire is designed to be a surface mounted panel ideal for installations where the cables for the system are to be on the surface of the fabric of the building.
Key Features
- Fully certified to BS EN54-2 and BS EN54-4
- 2-wire in 2, 4 or 8 zones
- Compatible for use on BS5839: Part 1: 2002 installations
- 2-wire repeaters and ancillary boards
- Fully programmable using simple menu options
- Adjustable sounder delay time
- Sounder configuration options
- Zonal sounder delay detectors only
- Zonal sounder delay call points only
- Coincidence input selection
- I.S Barrier selection by zone
- Short circuit fire by zone
- Non latching zones Silent zones
- Zone input delay
- General panel configuration
- Simple, single board construction
- Installer friendly
- Compatible with wide range of detection devices
- Two monitored sounder outputs 3 Amp power supply
- Auxiliary power output
Specifications
- Construction : 1.2mm Mild Steel
- IP Rating : IP03
- Weight : 6KG
- Power Supply DC Rating : 24V 3Amps
- Maximum Battery Size : 7Ah 12V (2 Per Panel)
Downloads
- Datasheet (Adobe PDF)
Additional information
| Weight | 6 kg |
|---|---|
| Zones | 2, 4, 8 |
