Automatic Emergency Test Switch (E/CH/ELTS)
Channel Safety Systems
Automatic Emergency Test Switch
This automatic emergency lighting test switch is designed to test the function of emergency luminaires. The test switch is permanently wired to the emergency luminaire supply. A key switch is used to interrupt the supply to the luminaires for a pre-programmed period of time. At the end of the time period the supply to the luminaires is automatically re-instated. The result is that there is no risk of depleting the batteries in the emergency fitting.
Three pre-programmed test intervals are available;
- 10 minutes
- 1 hour
- 3 hours
The unit will power up with the SUPPLY ON lamp illuminated the supply will be connected to the output.
Specifications
- Supply Voltage: 220-240 Volts AC 50 Hz
- Timing Period: 10 minutes, 1 hour, 3 hours
- Fixing Method:
- Surface fixing 25mm deep plastic surface mount moulded box
- Flush fixing 25mm steel wall box or 32mm deep cavity wall box.
- Terminal Capacity: 2.5mm 2
- Material: Flame retardant ABS
- Type: Class 2
- Temperature: -10°C to 35°C
- Conformity: EMC-89/336/EECLVD-73/23/EEC