Solo A3 Smoke Detector Tester Aerosol 250ml (SOLO-A3)
Solo A3 Smoke Detector Tester Aerosol 250ml
Famous for being 'the most thoroughly researched smoke test aerosol in the market', Solo A3 is non-flammable and is proven not to cause damage such as stress cracking to detectors. Importantly it has a very fast clearing time, saving very significant time – and money – on site.
- UL listed and detected manufacturer endorsed formula
- Lowest cost per test
- Fastest activation
- Fast clearing time
- No Phthalate Esters
- No silicon content
- Ozone friendly with no CFCs
- Sensor safe - does not damage plastic casing or internal circuitry
- Oil free formulation
- No residue
Frequently Asked Questions
How Many Detector Tests Would You Expect To Complete With A Single Solo A3 Can?
Typically, if the aerosol is used as instructed, then we would expect to see around 300 tests per canister however the following factors do have a baring;
- Environmental conditions: both ambient temperature and ambient air speed can have an effect on how much of the aerosol is used during a test.
- User: How long the nozzle of the aerosol is held down for. Instructions tell the user to carry out 1-2 second burst and repeat every 5 seconds as necessary.
- Equipment: Panel and wiring delays and time to alarm are also a factor. Polling from the panel can delay the time to alarm and effect how much aerosol is used.
- Another factor is how the aerosol canister has been stored. if during storage (at either the reseller or the customer premises) any aerosol canisters are exposed to high temperatures, this will affect the maximum number of tests achieved from a single aerosol canister.