ClickExpose

Simplicity Plus 1 or 2 Loop Addressable Panel

Zeta Alarms

    • (Exc. VAT: )
      • In Stock
    Add To Basket

    Simplicity Plus 1 or 2 Loop Addressable Panel

    The Simplicity Plus Analogue Addressable Fire Alarm Panel is the ideal introduction to the world of addressable fire alarm panels.

    As its name suggests, it has been designed with ease of use in mind, using pre-programmed values for its programming options. The installer simply needs to configure the loop and enter text labels via the built in keypad (optional).

    In a nutshell

    The Simplicity Plus is an addressable fire alarm system which is cost effective and extremely easy to install & commission. The panel communicates directly with each device so in the event of a fire, the panel will display the exact device (detector or call point) that signalled the alarm, allowing the fire to be located more quickly.

    Standards

    The Simplicity Plus fire alarm system has been designed to meet the full requirements of BSEN 5839 part 1 and BSEN 5839 part 6. The fire panel itself complies with EN54 part 2 and EN54 part 4.

    Cabling

    Only a single pair of wires is used which connect all detectors, call points, warning devices (sounders/flashers) and interfaces before returning to the panel (similar to a ring main). This approximately saves 40% compared with a 4-wire or conventional system and 10% compared to 2-wire systems.

    Cable Break Protection

    In the event of a cable break the Simplicity Plus will report the break and continue to operate as normal with full integrity. If the same break occurred in a 4-wire/conventional or 2-wire system up to an entire zone would be lost.

    Cable Short Circuit Protection

    By using short circuit isolators, in the event of a short circuit only the devices between two bases would be inoperative. Similar to a cable break, up to an entire zone would be lost on a 4-wire/conventional or 2-wire system.

    Alarm Indication

    Each device can be uniquely identified by the panel and a 20 character label set for each. In the event of a fire or fault the exact device which triggered it will be shown.

    Installation & Commissioning

    Once the panel has been connected to the loop, confirmation of the number, type and status of every device is available. This can then be checked against the system specification.

    Alarm & Fault History

    The Simplicity Plus includes a 2,046 event history which stores all alarm, fault and system events.

    Adding Extra Devices

    Should additional devices need to added to the system then these can be spurred off the nearest device (no need to break into the loop).

    System Monitoring

    Since every device is monitored constantly and communicates with the panel at a maximum of every 4 seconds, any malfunction in any device will be reported by the panel. This of course will include the exact location of the device.

    Features

    • Loop addressable fire alarm panel (64, 126 or 252 device capacity).
    • Complies fully to EN54 parts 2 & 4.
    • User definable zones.
    • Option for zonal or common alarm operation.
    • Options for I/O operation.
    • Alarm verification (help prevent false alarms).
    • User selectable languages.
    • Set of changeover relay contacts for faultcondition.
    • Set of changeover relay contacts for firecondition.
    • 2,048 event log (fire & fault).
    • Zone or device disablement.
    • One man test mode.
    • Plug & play, no need for any special tools orlaptop for commissioning.
    • Fully integrated Qwerty keypad.

    Frequently Asked Questions

    Do I require a software a software lead to prgramme the panel?

    The Simplicity range of panels are programmed directly from the panel only so no software/leads.

    Specifications

    • Supply Voltage : 230V AC =/- 10%
    • System Voltage : 24V DC (Nominal)
    • Number of Loops : 1
    • Loop Capacity : 64 or 126 Devices per Loop
    • Number of Zones :
      • SP-64/M : 4
      • SP-126/M : 8
      • SP-252/M : 8
    • Sounder Output : Addressable Sounders Only
    • Fault Output : 28V Repeat Output to Drive Relay(Normally Energised)
    • Fire Output : 28V Repeat Output to Drive Relay
    • Operating Temperature : -0°C to 50°C
    • Enclosure Size : 375mm x 335mm x 125mm

    Datasheet

    Related Products

    Simplicity Plus Addressable Fully Functional Repeater Panel SP-REP

    • Compatible with all Simplicity Plus Panels
    • Certified to EN54 parts 2 & 4
    • Sleek Metal Design

    In Stock

    SP-REP

    • £525.00
    • (Exc. VAT: £437.50)
    Add To Basket
    Same Day Dispatch
    Lowest Price Guaranteed
    Free UK Delivery over £200*
    Secure Online Order Processing
    Free Technical Support

    Newsletter Signup

    Enter your details and we'll occasionally send you special offers and product news.