ClickExpose
KAC Conventional Indoor Manual Call Point

MCP1A-R470SF-K013-01

KAC Conventional Indoor Manual Call Point

KAC

    • (Exc. VAT: )
      • In Stock
    Add To Basket

    KAC Conventional Indoor Manual Call Point

    Installation efficiency, flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.

    Installation time and ultimately cost, are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique ‘plug and play’ concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block, where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple, but effective, with no re-termination required and no time wasted.

    Through new standards and legislation, both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest ‘flex-ability’, the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.

    All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.

    Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard (Compliant markings only).

    The MCP1A product version is supplied with both a resistor and normally open clean contact electrical options. These options are easily utilised by simply connecting the terminal block to the required connection in the back of the MCP1 product. A variety of resistor versions are available, with both 470W and 680W offered as standard. However, other resistor types can be provided upon request. The MCP1B product version allows for connection to ‘Savwire’ systems.

    Features

    • Unique ‘Plug & Play’ installation concept
    • Total ‘Flex-Ability’ in the choice of operating element
    • Anti-Tamper facility
    • Enhanced aesthetics
    • Fully approved to the latest standards
    • Backward compatibility
    • CPD Approved

    Specifications

    • Cable Termination : 0.5-2.5mm2
    • Maximum Voltage : 30VDC
    • Current Rating (switch only) : 2 Amps
    • Humidity : 93± 3% non-condensing
    • Operating Temperature : -10°C to +55°C
    • Storage Temperature : -10°C to +55°C
    • Ingress Protection (IP) Rating : IP24D
    • Material : PC/ABS
    • Weight : 130g Flush 180g Surface
    • Colour : Red, Ral 3001

    Downloads

    Related Products

    PS200 Hinged Cover For KAC Manual Call Points PS200

    • Protects agains unwanted activations
    • Clip on fitting
    • Clear perspex

    In Stock

    PS200

    • £4.13
    • (Exc. VAT: £3.44)
    Add To Basket

    KAC Call Point Test Key (Pack of 10) SC070

    KAC Call Point Test Key (Pack of 10)

    In Stock

    SC070

    • £10.20
    • (Exc. VAT: £8.50)
    Add To Basket

    KAC Plastic Resettable Element For Call Points PS210

    • Compatible with the New Type KAC Call Points (See related products)
    • Enables the call point to be reset after alarm is activated
    • Yellow indicator on plastic element indicates to user that the call point has been activated.

    In Stock

    PS210

    • £1.43
    • (Exc. VAT: £1.19)
    Add To Basket

    KAC Spare Call Point Glass, Pack of 5 KG1

    Key Features

    • This glass is suitable for use in the following type Call Points:
      • KAC
      • Apollo
      • Morely
      • Fulleon
      • Ziton
      • Notifier
      • Electro Detectors
      • EMS
      • System Sensor
      • Nittan
    • Dimensions (HxWxD): 40mm x 71mm x 1.5mm

    In Stock

    KG1

    • £5.71
    • (Exc. VAT: £4.76)
    Add To Basket

    KAC M141W Spacer Piece For Manual Call Point M141W

    • 10mm spacer for KAC manual call points.

    In Stock

    M141W

    • £7.00
    • (Exc. VAT: £5.83)
    Add To Basket

    KAC Call Point Cover Seal - Pack of 5 P056

    Key Features

    • Call Point Cover Anti Tamper Seals
    • For Use With The New Type KAC Call Points and Covers
    • Pack of 5

    In Stock

    P056

    • £17.93
    • (Exc. VAT: £14.94)
    Add To Basket
    Same Day Dispatch
    Lowest Price Guaranteed
    Free UK Delivery over £200*
    Secure Online Order Processing
    Free Technical Support

    Newsletter Signup

    Enter your details and we'll occasionally send you special offers and product news.