SmartConnect Multi-Loop Card Module

SmartConnect Multi-Loop Card Module

The plug-in SCM-LCM module provides power for and handles communications to the analogue addressable devices. The SLC continuously monitors the status of all loop devices and displays their status. Up to 250 addresses (450mA max load) can be connected to a single loop. The loop devices can be addressed via an 8 way DIP switch, or they can be soft addressed using the MKIITOOL handheld programming tool which helps minimise the potential for error and could reduce the installation time associated with traditional hard addressing.

The AUTO-LEARN saves considerable time and effort when installing a new loop or when changing device configuration.

It allows the system to learn what devices have been installed on the loop, and can help locate wiring faults on the loop.

Features

• Designed to EN54 requirements
• Supports up to 250 addresses
• “Heartbeat LED” that shows communication between the module and the motherboard
• Extensive front unit status indications
• Time saving AUTO-LEARN facility
• 450mA max load (at 20 ohms loop resistance)
• Double address detection

Specifications

• Design Standard: EN54
• Rated Voltage: 30VDC Nominal
• Maximum Loop Current: 450mA
• Maximum Loop Resistance: 50Ω (25Ω per core)
• Maximum SLC Capacity: 250 Addresses
• Maximum SLC Cable Length: 2KM
• Maximum SLC Capacitance: 500nF
• Maximum SLC Baud Rate: 1024 bits per second (typical)
• Operating Temperature: -5°C to 40°C
• Max Humidity: 93% Non-Condensing
• Size (mm) (HxWxD): 105mm x 57mm x 47mm
• Weight: 0.15KG
• Recommended Cable Sizes: 0.8mm2 to 2.5mm2

Downloads

• Datasheet (Adobe PDF)
• Installation Manual (Adobe PDF)