SmartConnect Multi-Loop, 6 Module Addressable Panel (SMART6/32)

SmartConnect Multi-Loop, 6 Module Addressable Panel

The SMART6 Multi-loop is a powerful and sophisticated Analogue Addressable Fire Alarm Control Panel that offers a variety of modular components which allow it to meet a wide variety of applications.

The graphical touch screen provides a clear, uncluttered and intuitive interface which results in the end user requiring minimal training.

The control panel has the capability to support complex cause and effect programming and a wide range of user controllable functions that make the panel suitable for a vast range of projects from multi-site commercial developments through to industrial applications.

It can operate as part of a networked system of up to 64 panel’s peer-to-peer, or a standalone panel. It has powerful programming options that allow configurable control over whether messages from specific panels are transmitted around the network or remain local.

Each system component has been specifically designed to operate as part of a Smart Multi-loop EN54 listed system providing assurance that the detectors, interfaces, sounders, and panel are all fully compatible with each other and that the full range of system functionality is supported by all devices.

Features

• Modular construction allows a panel to be specified using just the required modules.
• Up to 4 loop card modules.
• 4.3” colour touch screen display.
• Capacity for up to 6 intelligent modules
• Full system redundancy
• Connection to TCP/IP Module.
• Extensive Day/Night mode programming.
• Full cause and effect programming via front panel or the Smart configurator PC software.
• 8032 event log entries.
• using multiple zone monitor modules, the panel can be configured into a fully functioning conventional panel.
• 250 Fyreye MKII devices per loop
• 254 Addressable programmable zones
• Up to 64 panel peer-to-peer network.
• Positive Alarm Sequence.
• Alarm Verification
• Day/night (Building occupied/unoccupied) programming.
• Alarm circuit special application 24V mode.
• 400W Power Supply.

Video

Specifications

• Description: Intelligent Addressable Control Panel
• Standard: EN54-2 & EN54-4
• Mains AC Supply Voltage: 230V AC (+10% / -15%) / 120V AC (+10% / -15%)
• Mains AC Supply Frequency: 47-63 Hz
• Power Supply DC Rating: 30V DC, 400W
• Battery Voltage: 24VDC
• Battery Charge Current: 1.1A (max)
• Battery Capacity: 2 x 12Ah, 12VDC sealed lead acid (max)
• Alarm: (C,NO,NC) Contact rating: 125VAC @ 0.5A / 30VDC @ 1A
• Fault: Normally Energised (C,NO,NC) Contact rating: 125VAC @ 0.5A / 30VDC @ 1A
• Network: Maximum Network Size 64 Nodes
• Maximum Distance Between Nodes: 1KM
• Maximum Software Zones: 254 Zones
• Maximum Event Log: 8032 Events
• Software Programming: Touchscreen LCD or Smart Configurator PC software
• LCD: 4.3” Resistive touch screen. 480 x 272 pixel resolution
• LED Indicators: 1 Red (1 x Alarm), 1 Green (Power), 10 Yellow (1 x Sounder Active, 1 x Sounder Fault, 1 x Fault, 1 x Relay Delay, 1 x Controls Active, 1 x General Disablement, 1 x General Test, 1 x Sounder Disablement, 1 x Sounder Delay, 1 x System Fault).
• Button Controls: Stop Sounders, Silence Buzzer, Scroll Display, Reset, Start Sounders
• Dimensions H x W x D (mm): 535mm x 385mm x 150mm
• Weight: 9KG
• Cable Entries: 34
• Max Module Capacity: 6
• Operating Temperature: -5°C (23°F) to 49°C (120°F)
• Relative Humidity: 93% Non-Condensing

Downloads

• Datasheet (Adobe PDF)
• Installation Manual (Adobe PDF)
• Maintenance Manual (Adobe PDF)
• Addressable Configuration (Adobe PDF)
• Conventional Configuration (Adobe PDF)
• Addressable System Layout (Adobe PDF)