Advanced MxPro 5 - 4 Loop Panel


    • (Exc. VAT: )
      • In Stock
    Add To Basket

    Advanced MxPro 5 - 4 Loop Panel

    The MxPro 5 series is fully expandable from 1 to 4 loops and supplied with 4 on-board sounder circuits, 20 programmable zonal LEDs with slide-in labels, and 25 System LEDs for information purposes. There are also 4 programmable function buttons with LED indication for confirmation of operation.

    The control panel consists of the latest dual flash-based microprocessor technology combined with a high resolution, high contrast, graphical LCD display and tactile keypad providing a simple select and click programming aid for engineer configuration and end-user

    Powerful cause-and-effect programming and enhanced trace diagnostics makes the panel suitable for a wide range of site applications from small to large complex multi-area systems. Fully programmable onsite via the on-board alphanumeric keypad, or PC-NeT configuration software.

    PC Software: An extensive suite of user-friendly Windows based PC software programs has been developed to enhance your experience when using MxPro 5 series fire panels. The suite incorporates a number of different programmes to include a configuration, service, logo and virtual panel tool to allow the flexibility of the equipment to be fully explored.

    Network: Simply adding a network card allows the panel to communicate with any other MxPro 5/MxPro 4 fire panel, remote terminal, or network peripheral, such as, ipGateway™ or BMS/graphical interface. The network operates as a true peer-to-peer system and can be configured in a fault-tolerant loop or radial format.


    • 20 programmable Zonal / 25 System LEDs.
    • Apollo, Argus Vega, Hochiki & Nittan Evolution* protocol support.
    • Advanced graphical LCD user interface and support for up to 200 fire zones by default allowing full EN54 compliance without additional hardware.
    • Dedicated USB & RS232 serial port for direct PC or modem connection.
    • Installer friendly Auto-learn, Loop Detection and On-board Scope facility for ease of commissioning and fault finding.
    • The graphical display can be configured to operate with virtually any language or character set, and allow the installer's logo to be applied using the Logo application software.
    • Integral P-Bus for system expansion via available option cards.
    • Ad-NeT peer-to-peer network with up to 2000 zones.
    • Approved to BS EN54 part 2, 4 and 13.

    Frequently Asked Questions

    How Can I Change The Company Logo On MXPro 5 Screen?

    This can only be changed with the use of the PC-NET-007 logo software and programming lead.

    When adding a 50 or 100 zonal expansion card to a 4 loop panel, will these be in addition to the 20 onboard LEDs?

    Yes, this is in addition to the 20.

    Would a single panel support different protocols on separate loop cards?

    No, each panel will support a single protocol only.

    Similarly does the MxPro 5 network support multiple panels each with different protocols?

    Yes, panels on the network can each support different protocols.

    Technical Specifications

    • Base Technology : Dual flash-based processors with real-time clock, trace diagnostics, programmable languages and character sets
    • Display : White backlit 240 x 64 graphical LCD
    • LED Indicators : 22 red (1 x Fire, 1 x More Alarms, 20 x Zonal Programmable), 1 green (Power), 13 amber and 12 bi-colour
      (Fault & System)
    • Controls : Alpha numeric keypad permitting Navigation, Reset, Mute, Silence, Resound, Evacuate, and 4 x
      Programmable Push Buttons
    • Protocols : Apollo (Xp95 / Discovery), Argus Vega, Hochiki ESP
    • Number Of Fire Zones : 2000 (200 per individual panel)
    • Number Of Loops : Dedicated 1-4 loop control panel
    • Devices Per Loop : Protocol dependent
    • Loop Current : 500mA per loop
    • On-Board Sounder Circuits : 4 x 1 Amp programmable
    • On-Board Relays : 2 x 1 Amp 30v AC/DC programmable (10mA, 5v min) - expandable to 4 using Mxp-507
    • Auxiliary Supply : 1 x 24v 500mA
    • Programmable Input : 1 x monitored programmable input on-board
    • Programmable Key Switch Inputs : 8 volt free inputs
    • Total Available Output Current : 5A maximum available for loop current + sounder outputs + auxiliary supply
    • Mains Supply : 200 - 240v 47-63 Hz AC (+10%, -15% tolerance) 1.4A max
    • Battery Capacity :
      • Large Enclosure : 24V, 4Ah internal (min), 24V, 18Ah internal (max)
      • Deep Enclosure (D) : 24V, 45Ah internal (max)
      • Extended Enclosure (E) : 24V, 45Ah internal (max)
    • Charger Current : 2A temperature compensated
    • Serial Ports : 1 x On-board RS232 connection for PC, modem, IP, or portable printer
    • USB Interface : 1 x USB B type connection for PC communication
    • Programming : On-board keypad or PC running Windows tools
    • Event Log : 5000 event & diagnostic + 500 fire
    • Networking : Optional plug in Network Card (Mxp-503 - Standard, or Mxp-509 - Fault-Tolerant)
    • Printer (Optional) : On-board (M, L, D Enc. Only)
    • Enclosure / Colour Steel : IP30 / RAL7035
    • Cable Entry (20mm Knockouts) :
      • Large Enclosure : 19 x top, 11 x rear, 2 x bottom
      • Deep Enclosure (D) : 30 x top, 11 x rear, & 3 x bottom
    • Size H x W x D mm :
      • Large Enclosure : 470 x 450 x 115
      • Deep Enclosure (D) : 470 x 450 x 190
    • Metalwork Options : Flushing bezel, battery box, utility enclosure, termination enclosure and rack mount
    • Approvals : EN 54-2:1998, EN 54-4:1998 & EN 54-13:2005


    Related Products

    Mx Pro Configuration Software & Lead

    Mx Pro Configuration Software & Lead


    • £120.89
    • (Exc. VAT: £100.74)

    Mx Pro Configuration Software & Lead

    • User Friendly.
    • Windows Programming.
    • XP & Vista Compatible.
    • Remote Diagnostics.
    • Product Branding Tool.
    • Virtual Control Mode.
    • Virtual Diagnostic.
    • Mode Cost Effective.

    In Stock


    • £120.89
    • (Exc. VAT: £100.74)
    Add To Basket
    Loop Driver Card For Advanced MxPro 5

    Loop Driver Card For Advanced MxPro 5

    • Loop card to expand the capacity of a MxPro 5 panel.
    • Version available which supports the Apollo, Hochiki & Argus Vega protocols or the Nittan protocol.

    In Stock


    • £175.86
    • (Exc. VAT: £146.55)
    Add To Basket
    Network Card For Advanced MxPro 5

    Network Card For Advanced MxPro 5


    • £214.79
    • (Exc. VAT: £178.99)

    Network Card For Advanced MxPro 5

    • Network card for Advanced MxPro 5 panels.
    • Large Ad-NeT+ 200 Panel Network.
    • Up to 1.5Km between Control Panels.
    • Standard or Fault-Tolerant versions available.

    In Stock


    • £214.79
    • (Exc. VAT: £178.99)
    Add To Basket

    Semi-Flushing Bezel For Advanced MxPro 5 Panels

    • Semi flush fitting for all MxPro 5 panels.
    • Picture frame effect for ease of installation 30mm flange for control panels, 20mm for repeaters.

    In Stock


    • £69.61
    • (Exc. VAT: £58.01)
    Add To Basket
    Advanced MxPro 5 Key Switch

    Advanced MxPro 5 Key Switch


    • £64.09
    • (Exc. VAT: £53.41)

    Advanced MxPro 5 Key Switch

    • Enable/disable controls.
    • Group isolate to disable I/O across network.
    • For use to start/enable a class change.
    • Trapped and un-trapped key switches available.
    • Control of multi-sensor/device sensitivity mode change.
    • Simple to install and configure.

    In Stock


    • £64.09
    • (Exc. VAT: £53.41)
    Add To Basket

    Advanced MxPro 5 - Remote Terminal (Repeater)

    • Programmable switch input
    • Graphical LCD Display
    • Ad-NeT/Ad-NeT+ Compatible
    • Slide-in Labels
    • Small, Robust & compact
    • 24V DC Operating voltage
    • 3 Year Warranty
    • Disable/enable options

    In Stock


    • £584.09
    • (Exc. VAT: £486.74)
    Add To Basket

    Advanced TouchControl Touch Screen Remote Terminal

    • 2 Part Enclosure for easy fit
    • 720P Resolution
    • Full Alarm Mapping
    • 500 Fire Event Log
    • Standard or Fault Tolerant Network Compatible

    In Stock


    • £1,970.51
    • (Exc. VAT: £1,642.09)
    Add To Basket

    Advanced MxPro 5 Access Enable Key Switch MXP-511

    • Enable/disable controls.
    • Group isolate to disable I/O across network.
    • For use to start/enable a class change.

    In Stock


    • £64.09
    • (Exc. VAT: £53.41)
    Add To Basket

    Mirrored or Brushed Stainless Steel Finishes For Advanced MxPro5 Panels

    • Clean and stylish.
    • Aesthetically pleasing.
    • High class look.

    In Stock


    • £431.86
    • (Exc. VAT: £359.88)
    Add To Basket

    Printer Assembly For Advanced MxPro 5 MXP-512

    • Fast instant response.
    • Fast and silent operation.
    • Thermal printer.

    In Stock


    • £418.60
    • (Exc. VAT: £348.83)
    Add To Basket

    Zonal LED Indication Cards for Advanced MxPro5 Panels

    • Programmable LEDs.
    • Supports dynamic zoning.
    • Fully programmable.
    • Cost effective against ancillary hardware.

    In Stock


    • £178.76
    • (Exc. VAT: £148.97)
    Add To Basket

    Remote Battery Temperature Sensor For Advanced MxPro 5 MXP-501

    • Simple to install.
    • External battery monitoring.
    • For use with all Axis EN series control panels.

    In Stock


    • £39.16
    • (Exc. VAT: £32.63)
    Add To Basket

    Advanced MxPro 5 AlarmCalm Button with Buzzer

    • Push button input
    • LED output (for use as polling/activated function)
    • Mechanically compatible with a single gang UK electrical back box
    • Fully addressable device address, sits on loop (Apollo: 1-126, Axis EN:1-240)
    • Fully programmable using AlarmCalm software, including verification and second-stage times
    • Unique device type recognised as AlarmCalm unit by MxPro 5 FACPs
    • Wiring terminations suitable for all Advanced recommended loop cables
    • Optional programmable audible buzzer output
    • Aimed at reducing unwanted alarms

    In Stock


    • £85.34
    • (Exc. VAT: £71.12)
    Add To Basket

    Routing Termination Card For Advanced MxPro 5 MXP-506

    • Routing Termination Card For Advanced MxPro 5 panels.

    In Stock


    • £101.53
    • (Exc. VAT: £84.61)
    Add To Basket

    2-Way Programmable Relay Card For Advanced MxPro 5 MXP-507

    • Each output individually programmable.
    • Cost effective against ancillary hardware.
    • Each output 30V AC/DC, 1 Amp rating.

    In Stock


    • £108.78
    • (Exc. VAT: £90.65)
    Add To Basket

    Advanced MXP-532 General Routing Interface MXP-532

    • Two fire routing outputs.
    • Outputs are monitored for open and short circuit wiring issues.

    In Stock


    • £256.70
    • (Exc. VAT: £213.92)
    Add To Basket

    PENN Peripheral Expanson Network Node For Advanced MxPro 5

    • Lets you install peripherals in remote locations without an additional panel.
    • Network in-built – either Standard or Fault Tolerant.
    • Up to 32 Nodes in Standard configuration and Up to 200 Nodes in FT configuration.

    In Stock


    • £463.34
    • (Exc. VAT: £386.12)
    Add To Basket

    Advanced MXP-554 IP Gateway LAN Interface

    • Provides remote access to devices on an Ad Net network..
    • Configurable event email notification.
    • Compatiable with both Mx-5000 & Mx-4000 series fire panels.
    • Available as PCB only or boxed in enclopsure.
    • Option of standard or fault-tolerant networks.

    In Stock


    • £614.06
    • (Exc. VAT: £511.72)
    Add To Basket

    Advanced PC-NET-015 Mx Service Tool Software PC-NET-015

    • Retrieval of analogue values, panel meter readings and event logs from the Mx control panels.

    In Stock


    • £117.96
    • (Exc. VAT: £98.30)
    Add To Basket

    Advanced Mx Pro Logo Programming Software PC-NET-007

    Enter a brief description of your product here. This description will be displayed on product list pages.

    In Stock


    • £117.48
    • (Exc. VAT: £97.90)
    Add To Basket
    Same Day Dispatch
    Lowest Price Guaranteed
    Free UK Delivery over £200*
    Secure Online Order Processing
    Free Technical Support

    Newsletter Signup

    Enter your details and we'll occasionally send you special offers and product news.