C-Tec CFP 8 Zone Conventional Repeater Panel (CFP760)

Features

• Can be used to repeat the functions of a master CFP standard or AlarmSense 2-8 zone fire panel at remote parts of site (e.g. all potential fire service entrances).
• Up to 8 repeaters per CFP master.
• Includes its own Mains power supply that requires its own standby battery supply.
• Provides the user with access to all AL1 and AL2 functions.
• Master/Repeater communication achieved using CFP761 network driver cards (one CFP761 is supplied with the Repeater, an additional CF761 card is required at the master CFP).
• Communicates over screened two-wire fire resistant cable.
• Total repeater network cable length should not exceed 1KM.
• Attractive flush or surface mountable plastic lid and enclosure - no bezel required.

Technical Specifications

• Compatibility : Compatible with C-TEC's CFP Standard and CFP AlarmSense panels. (CFP Economy panels cannot be extended with this product).
• Mains Supply : 230V 50/60Hz.
• Internal Power Supply : 19V-28.5V (27V nominal).
• Max Battery Size and Type : 2 x 12V 2.1Ah VRLA connected in series for 72 hour standby. 2 x 12V 1.2Ah for 24 hours.
• Max. Network Cable Length : 1KM.
• Product Dimensions (mm) : 380 W x 235 H x D 96mm.
• Construction & Finish : Plastic lid and base; RAL7035 textured
• IP Rating : IP30.
• Weight : 1.75kg (without batteries)
• Operating Conditions/Temperature : -5ºC to +40ºC. Max relative humidity: 95%.
• Product Dimensions : 367 W x 235 H x 96 D mm.
• Hole Required For Flush Mounting : 367 W x 220 H x 75 D mm. No bezel required.

Frequently Asked Questions

How many cores are required between CFP761 & CFP760?

Only 2 cores of fire rated cable are required.

Downloads

• Instructions (Adobe PDF)