Fire Alarm Detector Bases
Know what you're looking for?
Filter Products
Showing all 50 results
-
ActiV Mounting Base
C-Tec- Third-party certified to the relevant parts of EN54 in conjunction with our ActiV detectors
- Easy to fit with lots of working space
- Can be ceiling mounted in any orientation due to the true 360° degree viewing angle of the LED indicator strips on all ActiV detectors
- Integrated detector/base locking mechanism, head removal tool and ID tag
- Simple ‘click and twist’ design
- Remote LED terminals for the optional connection to a BF318 Remote indicator
- Bright tin plated steel terminals can accept fire rated cable of up to 2.5mm in diameter
- C4408D diode and C4408 non-diode bases available*
- Compatible with C-TEC’s entire range of ActiV conventional smoke and heat detectors
-
Apollo Discovery Marine Standard Mounting Base
Apollo- XPERT 7 Card addressing
- One-way fit
- Locking feature to prevent unauthorised removal
-
Apollo Orbis Timesaver Detector Base With Diode
Apollo- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Detector locking mechanism
- Continuity link for voltage testing of zone wiring prior to commissioning
- Other devices continue to work during unauthorised removal of detectors
-
Apollo Orbis TimeSaver Sav-Wire Base
Apollo- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Detector locking mechanism
- Is used in 'Sav-Wire' systems
-
Apollo Series 65 12V DC Relay Base
Apollo- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
- Can be used in fire and security systems
-
Apollo Series 65 Diode Base
Apollo- Detector locking mechanism
- Easy to wire
- Contains an earth connector
- Terminal for remote indicator
-
Apollo Series 65 End-of-Line Relay Base
Apollo- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
-
Apollo Series 65 Sav-wire Base
Apollo- Allows Series 65 conventional detection to work on Sav-Wire panels
- Detector locking mechanism
- Contains an earth connector
- Easy to wire
-
Apollo Series 65 Standard Base
Apollo- Detector locking mechanism
- Easy to wire
- Contains an earth connector
- Terminal for remote indicator
-
Apollo Series 65 Standard Relay Base
Apollo- Detector locking mechanism
- One way fit
- Easy to wire
- Contains an earth connector
-
Apollo XP95 Intelligent Deep Base
ApolloCompatible with all Apollo XP95 detectors, the Intelligent Deep Base has extra depth to allow cable-insertion through the side of the base.
-
Apollo XP95 Intelligent Heater Base
ApolloThe Intelligent Heater Base protects your Apollo XP95 detectors from environmental factors like icing and condensation.
-
Apollo XP95 Intelligent Isolator
ApolloThe XP95 Intelligent Isolator can be used in addressable fire alarm system loops to prevent short-circuit disruptions.
-
Apollo XP95 Intelligent Isolator Base
ApolloThis base is required to add the Apollo XP95 Intelligent Isolator to your fire alarm system.
-
Apollo XP95 Intelligent Mounting Base in White or Black
Apollo- XPERT Addressing.
- One way fit of detector.
- Locking feature to prevent unauthorised detector removal.
-
Apollo XP95 Isolating Base
ApolloThe XP95 Isolating Base isolates short circuits in the addressable loop while allowing the associated detector to remain active.
-
Base for Intrinsically Safe Flame Detector
Zeta AlarmsEnter a brief description of your product here. This description will be displayed on product list pages.
-
Base for Intrinsically Safe Smoke Detector
Zeta AlarmsEnter a brief description of your product here. This description will be displayed on product list pages.
-
Eaton CAB300 Intelligent Addressable Standard Base
Eaton- First fix base.
- Loop integrity switch.
- Multiple cable entry points.
-
Fike Sita ASD Detector Mounting Base, Pack of 5
Fike- Mounting bases for the Fike Sita ASD addressable detectors.
- Sold in packs of 5.
-
Fyreye MKII 12V Auto Reset Relay Base
Zeta AlarmsEnter a brief description of your product here. This description will be displayed on product list pages.
-
Fyreye MKII Addressable Detector Base
Zeta AlarmsThe MkII range of detectors can be mounted on 3 different bases, a shallow base (MKII-CB), a deep base (MKII-CB/D) and an isolator base (MKII-IB).
-
Fyreye Relay Base
Zeta AlarmsThe Relay base is mainly used on 12V security systems to signal detector operation to the panel. They can also be used on 24V fire systems where the activation of a particular detector requires a signal to nearby equipment (door holders for example).
-
Gent ES Detect Conventional Standard Base With or Without Diode
Gent- Standard base for ES Detector conventional Gent detectors.
- Available with optional diode.
-
GST DB-01D Common Conventional Detector Diode Base
GST- Common for all GST DC series detectors.
- Supports detectors locking to prevent unauthorised removal.
- Easy to install with standard mounting options.
-
Hochiki Conventional 2 Wire Base In Ivory or White
Hochiki- Sav-Wire detector mounting base
- Available in Ivory or White
-
Hochiki DIN Mounting Box Small or Large
Hochiki- Designed to house up to 6 Hochiki DIN Modules
- Quick-release screws
- Polyurethane gasket provides IP66 protection
- Corrosion free, resistant to most alkaline and acid
- Temperature resistance to +70 deg C, Impact resistant, and Non-flammable
- 32 knock-outs
- Supplied with DIN Rail and fixings
- IP66
-
Hochiki ESP Short Circuit Isolator Base in Ivory or White
Hochiki- Features integral SCI
- Compatable with Hochiki ESP sensors
- Available in Ivory or White
-
Hochiki SMB Adaptor Plate
Hochiki- Provides multiple fixing options for the CHQ module range
- Easy to install within the SMB-1 enclosure
- Pre-drilled with correct fixing holes
-
Hochiki YBN-R/6M Marine Approved Standard Base
Hochiki- Low Profile (only 8mm)
- Quick connections via square cable clamps
- Accepts 2.5 mm cables
- Bayonet slot, low insertion force for detectors
- Approved to MED by GL
- GL Type approval
-
Marine Mounting Base for Base Mounted Flame Detector
Apollo- Detector locking mechanism
- One way fit
- Contains an earth connector
- Easy to wire
- Contains no electrical parts
- Terminal for remote indicator
-
MBB-2 Hochiki Mounting Back Box with Glands (Ivory or White)
Hochiki- 4 cable entry holes suitable for cable glands (2 glands supplied).
- Colour matched to ivory or white detector range.
- Approved Sensor and Base range.
- Provides moisture and dust resistant fixing.
- Ideal for bulk-head fixing.
-
Nittan Evolution Detector Mounting Base
Nittan- Universal mounting base for Nittan Evolution range.
- Optional deeper version for surface cable.
-
Nittan Evolution Detector Mounting Base With Short Circuit Isolator
Nittan- Low Profile Base design.
- -ve Line Isolator.
- Low quiescent current.
- Self resetting when fault clears.
-
Nittan Evolution DIN Rail Mounting Circuit Isolator
Nittan- Low Profile Base design.
- -ve Line Isolator.
- Low quiescent current.
- Self resetting when fault clears.
-
Nittan UB-4 Standard Detector Base
Nittan- Nittan 4 Terminal Standard Detector Base.
- Low Profile Detector Base.
-
Orbis Intrinsically Safe (IS) TimeSaver Base
Apollo- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Continuity link for zone testing
- Detector locking mechanism
-
Orbis Marine Relay Base
ApolloThe Orbis Marine Relay Base incorporates a single-pole voltage-free changeover contact for switching ancillary equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change state
-
Orbis Marine TimeSaver Base
ApolloThe Orbis Marine TimeSaver Base is a design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedure.
-
Orbis TimeSaver Base with Continuity Switch
Apollo- Grouped terminals to make wiring easy
- Two fixing centres
- LED alignment mark
- Cable stripping guide
- Detector locking mechanism
- Product Depth - 20mm
- Product Diameter - 100mm
-
System Sensor B501AP Addressable Mounting Base
System Sensor- System Sensor addressble sensor base with SEMS screw connections and address identification label.
-
XPERT 8 SA5000-200 Intelligent Mounting Base
Apollo- Compatibility with Soteria, Discovery and XP95 detectors.
- Isolated and Non-isolated devices supported.
- Isolated wiper - maintains loop connectivity during temporary removal of devices.
- Supplied with XPERT 8 Card for CoreProtocol®.
- ‘E-Z Fit’ allows for simple mounting of the detector base after wiring.
- Base mark allows for LED detector alignment.
-
YBN-R/3 Hochiki ESP Sensor Mounting Base in Ivory, White or Black
Hochiki- Common mounting base for Hochiki ESP range of detectors
- Available in Ivory, White or Black
-
YBO-R/SCI Hochiki ESP Short Circuit Sounder Mounting Base in Red or White
Hochiki- Features short circuit isolator
- Designed for use with Hochiki ESP CHQ-WS2 and CHQ-WSB sounders
- Available in Red or White
-
Ziton SPB-2 Addressable Sounder Base in Red or White
Ziton- Pluggable base for ZP755 sounder.
- First fix facility.
- Ease of installation.
- Large wiring terminals.
-
Ziton SPB-2P Plugable Base for ZP755 Sounder in White
Ziton- Ease of installation
- First fix facility
- Large wiring terinals
-
Ziton ZP7-SB1-P Standard Base for ZP7 Detectors
Ziton- Common to all ZP7 series detectors.
- Automatic locking option.
- Address identification label.
- Easy to install.