Quatro Panel Peripherals

Enter a brief description of your product here. This description will be displayed on product list pages.

• Loop Expansion Card for the Premier Quatro Range of Panels

Enter a brief description of your product here. This description will be displayed on product list pages.

Enter a brief description of your product here. This description will be displayed on product list pages.

Enter a brief description of your product here. This description will be displayed on product list pages.

Enter a brief description of your product here. This description will be displayed on product list pages.

• 20 LED outputs
• Up to 64 modules per network loop
• 4 switch inputs
• Internal buzzer
• Can be configured as a master or a slave
• On board facility for firmware upgrade when needed
• Separate 24Vdc is required

• Designed for use with a touchscreen display
• Easy to use and setup
• 4 virtual keys
• Ability to send reports of alarms and faults via email to users/engineers
• Mimics the LED display of a Quatro Addressable Panel
• Mimics the LCD fault and alarm messages of a Quatro Addressable Panel
• Displays the location of Alarms or Faults on either a site map or building diagram
• Password protection to prevent unauthorised tampering.

• The panel network can be via hard wire or via LAN and a maximum of 5 panels (nodes) can be networked on the DL5
• Any panel connected via LAN requires a Gateway Network Card QT-GNC
• Any hard wired network would require a QT-NC Network Card
• Mimic output is via video output in CPU
• Repeater must be hardwired to any panel