GoLink by Howler Wireless Site Alarm

GoLink by Howler Wireless Site Alarm
 

Video Transcript

One howler monkey is an arresting sound. But when the whole pack gets going, it's an amazing cacophony. You don't want to hang around. It's time to get out. The new GoLink Wireless Fire Warning System by Howler works in a very similar way. Hit one Howler and the message ripples out across site in seconds. In plain language, the message is G-O, get out.

Back at the control panel, management instantly receive a message telling them exactly which call point or detector has been operated. The alarm can only be silenced at the panel, preventing unauthorized silencing of the alarm. Fire marshals are dispatched to the location to deal with the incident. Turnstiles are automatically released and within minutes, the roll call is being taken.

This all sounds pretty simple. And it's meant to be. The whole GoLink Fire Warning System has been designed around the basic premise that simplicity is the key. Simple to install. Simple to operate. Simple to maintain. 

No specialist gear is required to set up the GoLink system. Each unit has a unique address and this is set by these DIP switches. Once the howlers are addressed, the panel will automatically connect to the howlers and you can see a list of connected units on the panel display. The aim is to make installation as quick and as easy as possible.

The panel itself has a number of hotkeys in order to make operation as self-explanatory as possible. You don't even need to have read the instruction manual. There's also a test mode so that you can carry out a complete site tour without having to return to the panel. This means when you test each Howler, it will sound on its own and reset automatically before you move on to the next unit.

But behind all this simplicity is a sophisticated monitoring protocol, in which the panel constantly carries out system self-checks. The panel will constantly monitor the connections and will report if any Howler becomes disconnected. Likewise if the batteries go low on any Howler, this will be reported on the panel in good time.

Comprehensively tested and third party certified as meeting the requirements of the R&TTE; Directive and the EMC Directive, the GoLink Fire Warning System offers the ultimate in simplicity and reliability for temporary applications. Go simple, GoLink. Howler. Hit it and run.

Fire Alarms, Standalone Fire Alarms, Wireless Site Alarms, GoLink by Howler Wireless Site Alarm - Howler GoLink Push Button Alarm

Howler GoLink Push Button Alarm

Manufacturer: Howler

  • Quick and Easy to set up
  • Three Button Options
  • Beacon Option
  • Battery Powered
  • Model number: HO1/GL
  • Price: £349.70
  • (Exc. VAT: £291.42)
  • In Stock

Fire Alarms, Standalone Fire Alarms, Wireless Site Alarms, GoLink by Howler Wireless Site Alarm - Howler GoLink Manual Call Point

Howler GoLink Manual Call Point

Manufacturer: Howler

  • Easy to Use Wireless Manual Call Point
  • For Use with the GoLink Range of Equipment
  • Battery Powered
  • Model number: HOCP/GL
  • Price: £352.04
  • (Exc. VAT: £293.37)
  • In Stock

Fire Alarms, Standalone Fire Alarms, Wireless Site Alarms, GoLink by Howler Wireless Site Alarm - Howler GoLink First Aid Assistance Button

Howler GoLink First Aid Assistance Button HO5/GL/XS

Manufacturer: Howler

  • Easy to Use and Set Up
  • Battery Powered
  • Interlinkable with the GoLink Range
  • Complete with Beacon
  • Model number: HO5/GL/XS
  • Price: £420.82
  • (Exc. VAT: £350.68)
  • In Stock

Fire Alarms, Standalone Fire Alarms, Wireless Site Alarms, GoLink by Howler Wireless Site Alarm - Howler GoLink Control Panel

Howler GoLink Control Panel GLCP

Manufacturer: Howler

  • Quick and easy to install and link
  • Key Events logged on an SD Card
  • Battery Operated or Mains Powered
  • Compatible with Ancillary Devices
  • Model number: GLCP
  • Price: £752.00
  • (Exc. VAT: £626.67)
  • In Stock

Request A Product