Apollo AlarmSense 2 Wire System
- Choice of C-Tec, Kentec or Haes panels.
- Ideal solution for small installations, including HMOs.
Know what you're looking for?
Filter Products
Manufacturer
Apollo(12)
C-Tec(1)
Haes(1)
Kentec(1)
Type
Resolution
A Rating
Alarm In/Out
Anti-Fog
Audio In/Out
Auto Aligning
B Rating
Battery
Bluetooth Controller
Built-in Mic
Built-in Speaker
C Rating
Channels
Class A Holes
Class B Holes
Class C Holes
CO Testing
Codec
Colour
Detection Type
Device Type
Direction
Environment
Indoor(1)
IR Range
Extinguisher Type
F Rating
Face Detection
Fast Fix Base
First Aid
Hazardous Applications
No(1)
Head Removal
Heat Testing
Interconnectable
Lens
Lines
Low Level Controller
Marine Applications
No(1)
Material
Max HDD Capacity
Max Loops
Maximum Record Resolution
Minimum Distance
Monitor Outputs
Networkable
Optical Zoom
Photoluminescent
Pipework Diameter
PoE Ports
Power
Protocol
Range
Reach
Relay
Remote Control Test
Self-Test
Series
Short Circuit Isolator
No(1)
Sign Type
Size
Smoke Testing
Stimulus Type
System Type
2-Wire(1)
Technology
Touchscreen
Wireless Interlink
Showing all 15 results
-
AlarmSense Alarm Relay
Apollo- Enables devices such as visual indicators, pillow/bed alarms and radio vibrating or paging devices to be connected to AlarmSense system
- Ensures DDA compliance
-
AlarmSense AlarmSense Heat Detector
Apollo- Can be used for applications where smoke detectors are unsuitable
- Two types available; fixed heat (CS) or rate-of-rise (A1R)
-
AlarmSense Base
Apollo- Standard AlarmSense base
- Detects the removal of a detector head and reports a fault
-
AlarmSense Open-Area Sounder
Apollo- IP65 rated
- Apollo tone - synchronised with AlarmSense sounders and sounder visual indicator bases
-
AlarmSense Open-Area Sounder Visual Indicator
Apollo- Synchronised flashing red LED on sounder visual indicators and visual indicators
- IP65 rated
- Apollo tone - synchronised with AlarmSense sounders and sounder visual indicator bases
-
AlarmSense Optical Smoke Detector
Apollo- Responds well to slow-burning, smouldering fires
- Well suited for bedrooms and escape routes
-
AlarmSense Sounder Base
Apollo- Compatable with complete range of AlarmSense detectors
- High and low volume ranges
-
AlarmSense Sounder Visual Indicators Base
Apollo- Audio and flasher base
- Sounder range between 70dB(A) and 87dB(A)
-
Apollo Alarmsense Integrating Optical Smoke Detector
Apollo- Responds Well to Slow Burining Smouldering Fires
- 360 Degree Visibility of LED's
- Reduces False Alarms
- Quick Simple Installation
-
Apollo AlarmSense Manual Call Point
Apollo- Resettable operating element.
- Easy access, front reset mechanism.
- Suitable for semi-flush or surface mounting.
-
Apollo MiniDisc Remote Indicator
Apollo- Small and discrete remote indicator
- Compatable with with Apollo XP95, AlarmSense or Series 65 detectors
-
C-Tec CFP AlarmSense 2, 4 or 8 Zone Panel
C-Tec- Apollo AlarmSense panel
- Available 2, 4 or 8 zones
- Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones
- Third-party LPCB tested
-
Haes 2-12 Zone AlarmSense Fire Panel
Haes- 2-12 AlarmSense zones.
- Cable & labour saving Two-Wire technology.
- Approved to EN54-2 & 4.
- False alarm management with ‘non priority’ signalling & coincidence alarm operation.
- Local & general alarm switching.
- Ideal for Houses of Multiple Occupancy.
- Key switch or code entry for access control.
- Class change & pulsing sounder inputs.
- Fire & fault outputs.
- One man walk test.
-
Kentec Sigma CP-A AlarmSense 2, 4 or 8 Zone Panel
Kentec- Apollo AlarmSense 2-wire control panel
- Available in 2, 4 or 8 zone sizes
- Available in Surface or Flush Mounting Options
- Auxillary power supply
-
Locking Cap For AlarmSense Sounder Bases In White
Apollo- The secure design of the 45681-294 locking cap ensures tamper-resistant protection for AlarmSenses sounder or sounder/beacon bases
- Provides a discrete appearance for AlarmSenses sounder or sounder/beacon bases when used without a detector