ID2 Accessories

• 12V SLA batteries for fire alarm panels.
• Available in 3.4Ah, 7Ah, 12Ah or 17Ah capacities.
• VDS Approved.

• The indicators can be hard addressed via 8 way dip-switch OR
• Softly addressed using the MKII handheld programmer
• Each indicator can be programmed for one device or up to 12 devices
• Each indicator will be connected directly on to the detection loop

Enter a brief description of your product here. This description will be displayed on product list pages.

• The indicators can be hard addressed via 8 way dip-switch OR
• Softly addressed using the MKII handheld programmer
• Each indicator can be programmed for one device or up to 12 devices
• Each indicator will be connected directly on to the detection loop

• Loop powered (60 devices per loop as maximum)
• Hand addressed using the 8 way dip switch OR Softly addressed using our handheld MKII Programmer (part no. MKII-TOOL)
• Equipped with short circuit line isolator
• Extensive front unit indications

• This is not a loop powered device and an adequate 24Vdc input (with battery backup) is needed.
• Hand addressed using the 8 way dip switch OR Softly addressed using our handheld MKII Programmer (part no. MKII-TOOL)
• Equipped with short circuit line isolator

• This is a loop powered device, however loop load calculation must be performed to determine the permissable quantity of ZAZM-MI per loop.
• Hand addressed using the 8 way dip switch OR Softly addressed using our handheld MKII Programmer (part no. MKII-TOOL)
• Equipped with short circuit line isolator
• Extensive front unit indications

• Loop powered
• Equipped with short circuit line isolator