Fire Alarm Relays

• Flush or surfaced mounted options Mains voltage switching capability.
• 4 x 20 mm knockouts for surface and glanded cable entry.
• Terminals to allow daisy chaining of multiple units.
• Dual pole relays and additional terminals allow safe management of earth and neutral cabling when switching mains voltages.
• Bright LED indicating unit activation.
• Consistent look and feel to all other Identifire products.

The Easy Relay 12 is an 8 Amp switching relay that can be used in a wide variety of 12V DC applications including security system interfacing.

The Easy Relay 24 is a fire systems relay with a 24V coil intended to be used in an array of 24V DC applications such as fire system interfacing.

The Easy Relay 12 Single Gang Form Factor fits any standard single gang box. Designed for use as a security system/automotive relay it can be used in a wide variety of 12V DC applications.

The Easy Relay 24 Single Gang Form Factor is a relay with a 24V coil that's intended to be used in an array of 24V DC applications such as fire system interfacing. It fits any standard single gang box.

• Converts a single power output to relay operation.
• 12VDC & 24VDC versions.
• Selectable, replaceable, glass fuse options.
• LED status indications.
• Useful for intruder & access control applications.
• Ideal as fire door control relay in access systems.

• Wide Voltage range for multipurpose use.
• Dual pole relays and additional terminals allow safe management of earth and neutral cabling when switching mains voltage.
• Terminals to allow daisy-chaining of multiple units.
• Flush or surface mounted options.

The Easy Relay 240 is designed for use in interfacing general mains voltage to lower voltage applications. The relay is of a compact power type and has two sets of silver alloy contacts, capable of switching 8A each.

The Easy Relay 240 Gang Plate is designed for use in interfacing general mains voltage to lower voltage applications and fits any standard single gang box. The relay is of a compact power type and has two sets of silver alloy contacts, capable of switching 8A each.

• A general purpose, double-pole, polarised 24V 5A relay designed for use in 24V fire alarm systems.
• Incorporates a high intensity LED which illuminates red when the relay is active.
• Can be connected to a suitable control panel relay output or a standard polarised fire alarm sounder circuit to operate door retaining magnets, rollershutter doors, etc.
• Can be mounted on 25mm flush or surface mount back boxes.

• Isolate a 24V output for fire alarm panel.
• Prevent auxillary equipment such as autodiallers from activating.
• Label includes area to write on description.

• Isolating keyswitch to temporarily disable outputs when testing fire alarm system.
• LED flashes and buzzer soudners when active.
• Fits onto a standard single gang back box.

• 8 amp double pole relay.
• Contacts rated at 250v ac.
• Isolate key switch.
• Isolated LED indicator.
• Option to use key switch to energise the relay.

Easy-to-install Supervised Transceiver Wireless Relay with 4 dry contact inputs with 4 associated output relays. LED indication of front of panel and configuration via DIP switches.