Premier SX Fire Alarm Panel

This popular conventional fire alarm panel meets the full functional requirements of EN-54 part 2 & 4 and fully certified by the LPCB. Available in 1, 2, 4, 6 and 8 zone.

It is housed in a light grey flame retardent ULV0 enclosure, designed to meet modern architectural surrounding, with a removable hinged door. This fire alarm panel has been designed with ease of installation in mind, in addition to the robust electronic design.

Technical Specification

• Detection Zones - 1 (NPSX1), 2 (NPSX2), 4 (NPSX4), 6 (NPSX6) or 8 (NPSX8)
• Mains Voltage - 230 VAC +10% / -15% @ 50/60Hz
• System Voltage - 24 VDC (Nominal)
• Zone Voltage - 21 VDC (Nominal)
• Sounder Alarm O/P - 2 x 400 mA @ 24V DC (Nominal)
• Fault Relay Output - 1 x Relay SELV ( 1 Amp maximum)
• Fire Relay Output - 1 x Relay SELV ( 1 Amp maximum)
• Zone Capacity - 32 Devices per zone
• Remote Sounder Activation - Via N/O contact (class change)
• Sounder Activation Delay - 0-9 minutes in 1 minute increments
• Zone End of Line - IN4002 Diode (cathode stripe to +)
• Sounder End of Line - 10K Resistor
• Charger Voltage - 28.4V @ 20°C (with battery disconnected)
• Charger Size - 1.1 Amp
• Zone Short Circuit Protection - 100mA
• Charger Short Circuit Protection - Battery Voltage less than 20 V
• Enclosure Size - 355 L x 275 H x 100 D (mm)
• Weight - 3.25kg (Excluding Batteries)
  

Datasheet & Manuals

• Premier SX Fire Alarm Panel - Technical Data Sheet
  
• Premier SX Fire Alarm Panel - User Manual
• Premier SX Fire Alarm Panel - Installation Manual