Fike Twinflex Pro 8 Zone Fire Alarm Panel (505 0008)

The Fike Twinflex Pro 8 Zone Fire Alarm Panel is an intelligent analogue non-addressable panel capable of running up to an impressive 256 devices. Devices communicating with the control panel use the Twinflex data protocol based on a conventional cabling format.

This 2-wire control panel provides a fire alarm system with 8 zones capable of holding up to 32 devices each and recognises the difference between manual call points and smoke detectors. It also monitors each fire zone for detector head removal, open or short circuits, end-of-line faults and faults with devices. Two monitored outputs can also be configured as sounder circuits.

For quick configuration, an LCD display and keypad are built into the panel and the unit has an integral battery power supply that can keep the panel on standby for up to 72 hours in the event of mains power failure. A 500 event log records the panel's history and it also has a day/night mode and alarm confirmation function.

The fire alarm control panel is compatible with Twinflex devices only and requires one 2-core screened cable for each zone.

Technical Specification

• Dimensions: 331 x 331 x 99 mm
• Operating Temperature: +5C to +40C
• Mains Supply Range: 230V AC, +10%, -15%, 50/60Hz
• Standby Battery Requirement: 2 x 3.3Ah 12v Sealed Lead Acid
• Number Of Zones: 8
• Max Zone Length: 500 Meters
• Zone Loading: 27 SLU (32 Devices Max.)
• Zone Operating Voltage: 29.9V DC Nominal
• Max Zone Current: 250mA
• LCD Display: 4 lines of 20 characters
• Zone Labels: 12 characters
• Event Log: 500 events
• Inputs and Outputs:
  • Inputs: 1 x resistance monitored input (3k3 EOL, 680R firing resistor), 2 x un-monitored inputs
  • Fault Output: 1 x volt free relay (30V DC @ 1A max.)
  • Fire Outputs: 1 x volt free relay (30V DC @ 1A max.), 2 x 24V conventional sounder circuits (10K EOL, 315mA max.)

Approvals

• CE
• BS EN54 2 & 4 (LPCB)