Fyreye Relay Base (FE-RB)

There are 6 different Fyreye detector bases available for the conventional range of detectors namely common base, diode base and relay base.

The Relay base is mainly used on 12V security systems to signal detector operation to the panel.  They can also be used on 24V fire systems where the activation of a particular detector requires a signal to nearby equipment (door holders for example).  When using a relay base, DO NOT CONNECT A REMOTE LED.  The detector cannot sink enough current to operate both.

Technical Specification

• Supply Voltage - 24V DC
• Average Quiescent Current at 24V - 0µA
• Alarm Current At 24V - 15mA
• Relay Max Switching Power - 30W, 50VA
• Relay Max Switching Current - 1A Resistive
• Relay Max Switching Voltage - 50V AC
• Relay Minimum Capability - 10µA, 10mV
• Relay Dropout Voltage - <6V
• Operating Temperature - -20 to +90° (non condensing or icing)
• Max Wind Speed - Not Affected
• Connections - L1in, L1out, L2, -R, Earth
• Base Size - 100mm diameter x 15mm deep
• Weight - 171.4g