The Fyreye optical smoke detector incorporates a pulsing infra red LED Located in an optical chamber inside the detector. The chamber is designed to eliminate the effect of any external light source.
A Photodiode is located inside the optical chamber at an angle to the IR LED. Under normal conditions no IR reaches the photodiode. But when smoke enters the chamber it causes the IR to scatter, and this will then be picked up by the photodiode. If the photodiode “sees” smoke on the 2 following pulses, the detector enters the alarm state, and lights its LED.
Technical Specification
- Model : FEO2000
- Supply Voltage : 9-33V dc
- Average Quiescent Current : AT 9V 35μA
- Average Quiescent Current : AT 24V 40μA
- Alarm Indication : Clear LED, Red in alarm
- Alarm Current At 9V : 17mA
- Alarm Current At 24V : 52mA Max
- Alarm Trigger Condiction : 3% per Metre smoke obscuration
- Operating Temperature :-20 to +60°C (non condensing or icing)
- Max. Wind Speed : Not affected
- Remote Output Characteristics : Current Sink to –ve line (17mA max)
- Compatible Bases : FE-CB Fyreye Common Base, FE-DB Fyreye Diode Base, FE-RB Fyreye Relay Base, FE-SB Sounder Base, FE-SFB Sounder Flasher Base, FE-RB/AR 12V Auto Relay Base
- Detector Size (Without Base) : 100mm diameter x 40mm deep
- Weight (Without Base) : 94g
Datasheet
