Push Button Temporary Alarm (Round) (PBTA-200)

The PBTA-200 push button temporary fire alarm is activated by pressing the "mushroom" button fixed to the front of the device.  Once activated the unit will sound & flash.

*It can be used as a standalone alarm or interconnected in series.

Technical Specification

• Model : PBTA-200
• Average Current : 10uA
• Alarm Current : 200mA
• Sound Output : 85db @ 3m
• Strobe Colour : Red
• Operating Temperature : -10C to +50C
• Minimum Continuous Temp : 0C
• Maximum Humidity : 95% RH Non Condensing
• Alarm Activation : Manual (press "mushroom" button)
• Reset : Manual (twist "mushroom" button)
• Number of Interlinked Units : 32
• IP Rating : IP35
• Size, Width x Height x Diameter : 230mm x 230mm x 104mm
• Weight (Including Batteries) : 650g (850g)

Discount available for larger orders, call us now on 01792 452 700.

Downloads

• PBTA-200 - Push Button Temporary Alarm (Adobe PDF)

How are these Temporary Fire Alarms connected?

They are wired together using 2 core standard electrical cable.

What is the maximum distance between two interconnected Temporary Fire Alarms?

The maximum distance between any two connected alarms is 100 metres. Should a system comprise of more than 2 interconnect alarms, then 100m is the maximum distance for each connection, therefore a system with 5 alarms could span 400m.

Does the Push Button Temporary Alarm comply to BS standards?

The temporary alarms can be used as a CATEGORY M (Manual only) system under BS5839 part 1.

How many PBTA-200 Push Button Temporary Alarms can be interconnected?

32 devices can be interconnected together.