HyFire Wireless Translator Module (Loop Powered) (HFW-W2W-01 )

The HyFire Wireless Translator Module allows you to connect wireless devices to your existing fire alarm system. Wireless devices alongside hard-wired devices can be a great combination, particularly for complex systems or when you want to protect a group of buildings.

This translator module can be connected to up to 32 field devices and multiple translators can be used on the same system providing there are enough loop addresses available. Bi-directional wireless communication, self-optimising wireless amplitude and automatic wireless channel hopping make this a fully intelligent wireless module for use in your fire alarm system. Two orthogonal antennae also work to reduce signal fade and ensure you have continuous reliable radio communication.

System status is available through the inbuilt LCD display and power supply comes directly from your existing fire detection loop, meaning no need for an independent power source!

IP68 housing makes the translator module suitable for both exterior use and wet environments.

Technical Specification

• Power Supply: From existing fire detection loop
• Indication: LCD display with 5 LEDs
• PC Connection: Yes
• Communication Range With Field Devices: 150m (open space)
• Communication Range With Expander Module: 300m (open space)
• Operating Frequency: 868-870 MHz
• Modulation Type: Frequency modulation
• No. of Operating Channels: 7
• Time Period Between Wireless Signal Transmissions: From 7 seconds to 2 minutes
• Dimensions: 160mm x 120mm (excluding aerials)
• Operating Temperature Range: -30°C to +50°C
• Radiated Power: 0.01-10mW
• Current Consumption: 17mA
• Operating Voltage: 15-42V DC
• IP Rating: 68

Datasheet

• HFW-W2W-01 Wireless Translator Module Datasheet (Adobe PDF)