Rafiki Twinflex Multipoint Detector with Sounder (202 0001)

Specifiers and installers who choose the Rafiki Multipoint detector do so secure in the knowledge that the fire detection performance detector can be matched to the environment in which it is installed -and charged at anytime during the lifetime of the installation.

The mode of detection required can be simply set by configuring the DLL switch in the detector electronics module. All modes are compliant with European detector type specifications, and are suitable for use in installations compliant with BS5839: Part 1: 2002.

Modes of Detection

Smoke 1

Highly thermally enhanced optical
Used where ionisation detectors are normally fitted, especially when there are high ceilings or a risk of free burning fires.

Smoke 2

Thermally enhanced optical
Used where optical detectors are normally fitted, when there isa risk of a smouldering fire and for escape routes.

Smoke 3

Thermally enhanced optical with pulse rejection
Used where optical detectors are normally used in positions expose to brief concentrations of water vapour or smoke e.g. from a bathroom, kettle etc.

Heat 1

Rate of Rise to 58^oC
Used where a standard rate of rise detector would normally be used.

Heat 2

Low fixed temperature 58^oC
Used where a standard fixed temperature heat detector would normally be fitted, suitable for kitchens etc.

Heat 3

High fixed temperature 90^oC
Used where a high fixed temperature heat detector would normally be fitted, suitable for boiler rooms, commercial kitchens etc.