Fike Twinflex Pro 4 Zone Fire Alarm Panel (505 0004)

The Fike Twinflex Pro 4 Zone Fire Alarm Panel is classed as an analogue non-addressable panel and is capable of running up to 128 devices in total. Using a conventional cabling format, devices communicate with the panel using the Twinflex data protocol.

This intelligent 2-wire control panel provides you with a fire alarm system with 4 zones capable of holding up to 32 devices each. This fire alarm system control panel recognises the difference between manual call points and smoke detectors and also monitors each fire zone for detector head removal, open or short circuits, faults with devices and end-of-line faults. Two monitored outputs that can also be configured as sounder circuits.

An LCD display and keypad are built into the panel for quick configuration, and the unit has an integral battery power supply that can keep the panel on standby for up to 72 hours in the event of mains power failure. The event log can hold up to 500 events and it also has a day/night mode and alarm confirmation function.

Compatible only with Twinflex devices and requires one 2-core screened cable for each zone.

Technical Specification

• Dimensions: 331 x 331 x 99 mm
• Operating Temperature: +5C to +40C
• Mains Supply Range: 230V AC, +10%, -15%, 50/60Hz
• Standby Battery Requirement: 2 x 3.3Ah 12v Sealed Lead Acid
• Number Of Zones: 4
• Max Zone Length: 500 Meters
• Zone Loading: 27 SLU (32 Devices Max.)
• Zone Operating Voltage: 29.9V DC Nominal
• Max Zone Current: 250mA
• LCD Display: 4 lines of 20 characters
• Zone Labels: 12 characters
• Event Log: 500 events
• Inputs and Outputs:
  • Inputs: 1 x resistance monitored input (3k3 EOL, 680R firing resistor), 2 x un-monitored inputs
  • Fault Output: 1 x volt free relay (30V DC @ 1A max.)
  • Fire Outputs: 1 x volt free relay (30V DC @ 1A max.), 2 x 24V conventional sounder circuits (10K EOL, 315mA max.)

Approvals

• CE
• BS EN54 2 & 4 (LPCB)