Simplicity Micro Addressable Fire Alarm Panel (SP-M)
Product Options
The Simplicity Micro is a unique concept that provides the best possible entry level solution for addressable fire alarm systems. It is directed primarily towards small installations, where traditionally the use of addressable systems would have been considered cost prohibitive.
The Micro is based upon the successful Simplicity 64 & 126 fire alarm panels and incorporates many of the larger systems features. These include single loop connection, minimal commissionisng & configuration, 20 character label for each connected device and 1 2,046 history event log.
- Complies fully to EN54 parts 2 & 4
- CE Marked
- Slimline enclosure
- Flame retardant ABS plastic
- Set of changeover relay output in fault condition
- Set of changeover relay output in relay condition
- Each detector can have a sounder or combined sounder & flasher base
- 2,046 event log (fire & fault)
- Zone or device disablement
- One man test mode
- Plug & play, no need for any special tools or laptop for commissioning
- Fully integrated keypad
- All associated devices are loop powered
- Supply Voltage : 230V AC +/- 10%
- System Voltage : 24V DC (nominal)
- Number of Loops : 1
- Loop Capacity : 32 devices
- Number of Zones : 4
- Sounder Output : Addressable sounder only
- Fault Output : 28 V repeat output to drive relay (normally energised)
- Fire Output : 28 V repeat output to drive relay
- Operating Temperature : -0°C to 50°C
- Enclosure Size (mm) : 355 x 275 x TBC
- Weight : TBC
- Battery Size : 2ah
In a nutshell
The Simplicity Micro is an addressable fire alarm system which is cost effective and extremely easy to install & commission. The panel communicates directly with each device so in the event of a fire, the panel will display the exact device (detector or call point) that signalled the alarm, allowing the fire to be located more quickly.
Standards
The Simplicity Micro fire alarm system has been designed to meet the full requirements of BSEN 5839 part 1 and BSEN 5839 part 6. The fire panel itself complies with EN54 part 2 and EN54 part 4.
Cabling
Only a single pair of wires is used which connect all detectors, call points, warning devices (sounders/flashers) and interfaces before returning to the panel (similar to a ring main). This approximately saves 40% compared with a 4-wire or conventional system and 10% compared to 2-wire systems.
Cable Break Protection
In the event of a cable break the Simplicity Micro will report the break and continue to operate as normal with full integrity. If the same break occurred in a 4-wire/conventional or 2-wire system up to an entire zone would be lost.
Cable Short Circuit Protection
The Securetone Micro combined sounder & flasher base (SM-ASFIB) includes a short circuit isolators so in the event of a short circuit only the devices between two bases would be inoperative. Similar to a cable break, up to an entire zone would be lost on a 4-wire/conventional or 2-wire system.
Alarm Indication
Each device can be uniquely identified by the panel and a 20 character label set for each. In the event of a fire or fault the exact device which triggered it will be shown.
Installation & Commissioning
Once the panel has been connected to the loop, confirmation of the number, type and status of every device is available. This can then be checked against the system specification.
Alarm & Fault History
The Simplicity Micro includes a 2,046 event history which stores all alarm, fault and system events.
Adding Extra Devices
Should additional devices need to added to the system then these can be spurred off the nearest device (no need to break into the loop).
System Monitoring
Since every device is monitored constantly and communicates with the panel at a maximum of every 4 seconds, any malfunction in any device will be reported by the panel. This of course will include the exact location of the device.
Other Options
Are you interested in this product or know someone that might be?
