AirCOn8 Addressable Carbon Monoxide Monitoring & Ventilation Control System (AC-8)

The AirCOn 8 system is a self conditioned controller with a capacity to handle up to 110 CO monitors which are divided into 8 monitoring zones. Each Zone will permanently display on the Liquid Crystal Display (LCD) the highest concentration of CO in that zone in PPM (Particles Per Million). This monitored value is updated every minute.

The system will allow up to 2 interface modules (ZIOU) which are programmed to initiate a signal to ventilation equipments to operate at pre-determined levels of concentration. Should the CO concentration keep rising while the ventilation is still on, an alarm is raised at a pre-determined level.

The AirCOn 8 system is idea for;

• Underground car parking facilities
• Warehouses where non-electric fork lift & vehicles are used
• Tunnels
• Factories
• Boiler Rooms
• & more

Technical Specification

• Model : AirCOn8
• Mains Voltage : 230 ± 10% VAC, 50/60 Hz
• System Voltage : 24 VDC + 9V Communication
• Power Supply : 1.0 Amp PSU
• Wiring : 1 Loop, 2000 metres
• Panel Size : 335L x 275H x 100D (mm)
• Space For Batteries : Up to 2 x 7.0 AH SLA Batteries
• Ingress Protection : IP43

Datasheet

• AC-8 - AirCOn8 Addressable Carbon Monoxide Monitoring & Ventilation System (Adobe PDF)