Premier Elite Conventional Fire Alarm System

The Fyreye common base is used on systems that don't need to keep line integrity on head removal, and also on addressable systems.

The Fyreye diode base is used on systems that do need line integrity on head removal.  This would include all conventional systems that mix detectors & call points on the same line.

Replacement Door Keys for Premier Elite & Premeir AD Fire Alarm Panels.

The ZT-CP2 is the latest conventional call point from Zeta Alarm Systems. It has a modern design, and has been built to EN54 part 11.

The Fyreye Extra range of conventional detectors have an extra LED to improve detector identification in an alarm condition. The 2 LEDs allow an alarm to be observed from all angles.

The rate of rise detector uses a thermistor arrangement to sense a quick rise in temperature, and also a final threshold temperature of 57°C.

The Fyreye Extra range of conventional detectors have an extra LED to improve detector identification in an alarm condition. The 2 LEDs allow an alarm to be observed from all angles.

The fixed heat detector has a single thermistor arrangement that gives an alarm at a temperature of 90°C.

The Fyreye Extra range of conventional detectors have an extra LED to improve detector identification in an alarm condition. The 2 LEDs allow an alarm to be observed from all angles.

The Detector uses a pulsing IR LED & Photodiode to detect IR scatter caused by smoke entering the chamber.

Seadled Lead Acid Batteries for use with fire alarm systems in the event of mains failure.

The FEOH2000 is the latest addition to the Fyreye range of detectors which incorporates both an optical chamber and heat sensing element with advanced detection technology and discrimination algorithms. This dual optical multisensor is the perfect replacement to ionisation detectors.