• Secure on-line ordering
  • Same day dispatch*
  • Sales & enquiries 01792 455 175

You are in: Home > Fire Alarms > Fire Alarm Systems

Fire Alarm Systems

We supply a wide range of Fire Alarm Systems, from which the following 3 are the most popular.

Select from the following Fire Alarm Systems


Not sure which Fire Alarm System is most suitable?

If you are unsure which of these Fire Alarm Systems is most suitable then the following table highlights the features of each. Alternatively to discuss your Fire Alarm System requirements in more detail, contact us now on 01792 455 175 and we will be more than happy to help.

 

Conventional Fire Alarm System

2 Wire Fire Alarm System

Addressable Fire Alarm System

Type Conventional fire alarm system 2 wire fire alarm system Addressable fire alarm system
Standards Fully complies with all relevant BS and EN standards Fully complies with all relevant BS and EN standards Fully complies with all relevant BS and EN standards
Panel Sizes Fire alarm panel available in 1, 2, 4, 6 or 8 zones Fire alarm panel available in 2, 4 or 8 zones Fire alarm panel available in 4 zones
Wiring Detectors & call points are connected on a pair of wires for each zone, warning devices (sounders & flashers) for all zones are connected on a separate pair of wires All devices (detectors, call points, sounders & flashers) are connected on the same pair of wires for each zone All devices (detectors, call points, sounders & flashers) are connected on a single pair of wires for all zones, this is typically wired in a complete loop returning to the panel (similar to an electrical ring main)
Alarm Identification During an alarm the panel will identify the zone containing the detector which was triggered During an alarm the panel will identify the zone containing the detector which was triggered During an alarm the panel will identify the exact detector which was triggered (a 20 character label can also be specified for each device, for instance “Bedroom a” which will be shown during an alarm)
Other Features     Alarm & fault history, cable break & short circuit protection and system monitoring
  • Page 1 / 7 - Sort by: Price · Title
  • < Previous · 1 · 2 · 3 · 4 · 5 · 6 · 7 · Next >

Rafiki Twinflex Manual Call Point Reset Key (45-0022)

Manufacturer: Rafiki

Fire alarm call point test key suitable for the Rafiki Twinflex range of call points.

  • Price: £1.050.89 ex VAT)
Quantity:

Rafiki Multipoint Detector Deep Back Box (900 0001)

Manufacturer: Rafiki

Deep back box suitable for surface mount cable termination of cables with trunking, conduit or glands.

  • Price: £2.341.99 ex VAT)
Quantity:

Fyreye Common Base (FE-CB)

Manufacturer: Zeta Fire Alarm Systems

The Fyreye common base is used on systems that don't need to keep line integrity on head removal, and also on addressable systems.

  • Price: £2.942.50 ex VAT)
Quantity:

Fyreye Diode base (FE-DB)

Manufacturer: Zeta Fire Alarm Systems

The Fyreye diode base is used on systems that do need line integrity on head removal.  This would include all conventional systems that mix detectors & call points on the same line.

  • Price: £3.172.70 ex VAT)
Quantity:

Replacement Door Keys for Premier Elite & Premier AD Fire Alarm Panels (PE-KEYS)

Manufacturer: Zeta Fire Alarm Systems

Replacement Door Keys for Premier Elite & Premeir AD Fire Alarm Panels.

  • Price: £4.113.50 ex VAT)
Quantity:

Rafiki Twinflex Base Assembly (45-0306-303)

Manufacturer: Rafiki

Rafiki Twinflex Base Assembly
  • Price: £4.583.90 ex VAT)
Quantity:

Conventional Call Point Red Without Perspex (ZT-CP1)

Manufacturer: Zeta Fire Alarm Systems

The ZT-CP2 is the latest conventional call point from Zeta Alarm Systems. It has a modern design, and has been built to EN54 part 11.

  • Price: £7.056.00 ex VAT)
Quantity:

Conventional Call Point Red With Perspex (ZT-CP2)

Manufacturer: Zeta Fire Alarm Systems

The ZT-CP2 is the latest conventional call point from Zeta Alarm Systems. It has a modern design, and has been built to EN54 part 11.

  • Price: £7.646.50 ex VAT)
Quantity:

Conventional Call Point White Without Perspex (ZT-CP1/W)

Manufacturer: Zeta Fire Alarm Systems

The ZT-CP2 is the latest conventional call point from Zeta Alarm Systems. It has a modern design, and has been built to EN54 part 11.

  • Price: £9.177.80 ex VAT)
Quantity:

Fyreye Extra Conventional Rate of Rise and Fixed Heat Detector (FEHE2000)

Manufacturer: Zeta Fire Alarm Systems

The Fyreye Extra range of conventional detectors have an extra LED to improve detector identification in an alarm condition. The 2 LEDs allow an alarm to be observed from all angles.

The rate of rise detector uses a thermistor arrangement to sense a quick rise in temperature, and also a final threshold temperature of 57°C.

  • Price: £9.408.00 ex VAT)
Quantity:
  • Page 1 / 7 - Sort by: Price · Title
  • < Previous · 1 · 2 · 3 · 4 · 5 · 6 · 7 · Next >