- Two wire installation – The Twinflex Fire Alarm System requires only one circuit per zone to connect all devices (Twinflex Detectors, Twinflex Call Points, Twinflex Sounders and Twinflex Flashers).
- Installation savings – Savings can be as high as 40% with save on cable, installation time and sounders.
- Callpoint identification – Twinflex Panels can differentiate between callpoint or detector alarms.
- Built-in end of line device – All devices including Twinflex Detectors, Twinflex Callpoints and Twinflex Sounders have a selectable built-in end of line monitoring function. No resistors or extra circuits required.
- No base diode requirement.
- Twinflex Multipoint Detectors provides 7 modes of detection.
- System fully complies with BS and EN.
- Up to 32 devices per zone.
- Easy to install – no need to worry about marking “in’s” and “out’s”.
- Twinflex Panels are available with 2,4 and 8 zone panels.
- 8 and 16 zone Twinflex Repeater Panels available.
- 72 hour standby.
- Auxiliary sounder circuit.
- Twinflex Output Module for plant switching, door release etc.
The Rafiki Twinflex Fire Alarm System is available now from Discount Fire Supplies.
This information has been referenced from an official Rafiki publication.